Mark. I am sure what the Victron technician meant with shore power / generator was either one and not both, of course. The word 'simultaneously" was referring to AC and water heater use, in his exampl

Hi Dan "Regarding the power-pass current, I am not clear how Victron handles this. I am assuming that it is counting this as part of the 16amp limit on the AC input side, so this would limit what I ca

I second Bill R. Just did the anti-fouling on my A54 and 20 L is a good estimate. You probably can get by with 2 liters less. I used much more because I decided to apply 3 coats Roque Attika A54 # 117

Nicely done, Gary! Congrats. Thanks for taking the time. Roque Attika A54 #117 Paraty Em dom, 22 de set de 2019 às 10:56, Mark McGovern <mfmcgovern@...> escreveu:

Hi Ruedi If the leak you are worried about is water getting inside the boat, then don’t. This pad is not intended to seal that. It is made out of PU (polyurethane), 90 SH (“hardness”), 5 mm thick. Sev

Alan I recently bought from Amel. The rubber valve is a reinforced new version ( see pic) 1 [03028] KIT POMPE MARINA ZZ 219424/ Electric bilge pump repair kit E$124,60 plus VAT 2 [03219] CLAPET ASPIRA

Thank you Bill. What a compliment!! I hope this can be useful to A54 owners Best

Hi all I replaced the base of the cockpit helm seat with a custom made SS base. Now I can open the engine hatch without having to move the cockpit table. Much easier and much safer. Many thanks to Jos

Duane Regarding the “pin holes”: Diameter: 5 mm Depth: 4 mm Distance between holes ( center): 23.5 mm The cover is curved (like a dome). 12 mm high Sorry no info on Tab Screw I took pictures that migh

Alan Unless you have a very specific problem or reason to do it, I would not pull the masts. And 7 years old and re-rigging are definitely not good reasons. You will probably spend more and take more

Duane Try gaetan@... ( gaetan at caraibe-greement.fr ) Best Roque Attika A54 117 Santos- Brazil

Dear Mark Thank you, I am touched. Judging by the kind words you took the time to write, I am sure you would do the same in similar circumstances. Roque Attika A54 # 117 Santos- Brazil Em sex, 28 de j

To anyone who might know the owner of S/V FAYAL, a SM 2000, hull 258 (?) Port of Call La Rochelle, I’d like to be put in touch with him/her. A week ago I saw FAYAL on a shipyard very close to where my

Mohammad and Aty. Thank you . That was helpful. Em ter, 11 de jun de 2019 às 10:04, Mohammad Shirloo <mshirloo@...> escreveu:

Mohammad & Aty I had a few cracked wires at the main too (#117). I reported this fact to ACMO in november 2018. Would you care to tell when you informed ACMO about this failure? Was it last year? Than

Oliver I am replacing all standing rigging, including turnbuckles. They are from 2009. Regarding price, you can call Laetitia Boudon from ACMO ( laetitia@... ) and get a quote for your model and h

Hi Nick I just got my new rigging from ACMO and it is a straight swap. That means the pin for the new 12mm wire, that replaces the current 10mm, is thinner than the others 12 mm wires pins. I don’t kn

Thanks. Em sex, 31 de mai de 2019 às 10:25, ngtnewington Newington via Groups.Io <ngtnewington@...> escreveu:

Nick Diz you buy the new rig from ACMO? Roque Attika A54 117 Paraty Brazil Em sex, 31 de mai de 2019 às 00:26, ngtnewington Newington via Groups.Io <ngtnewington@...> escreveu:

Hi I just uploaded, in the files section, an “Amel 54 Manual” set (Owner, User and Options) in Italian. I also have the versions in German, French, Spanish and Portuguese. I uploaded just this one to