Hi to all and tank so much to all, Problem solved ! - it was possible, as suggested, to insert up-down a long stick through the deck hole into the full tank. I used the spear gun rod, I'm a very bad u

Hi to all, I remember that some used to pour acid into the tank to dissolve the organic obstruction. But I don't remeber which, from which hole and how to work. Please, any suggestion may help. All th

Hi to all, Thanks K Mike and Danny for your suggestions about. Normally it works ( W40 ) but my decision is to avoid any dangerous situation : When you need the engine it must start, always. Two failu

Hi to all, at sunset , sailing Water Bligh, Fiji, I had to start my Yanmar to go to anchorage. Nothing…no engine. At the moment I remembered a similar situation when we were sailing Eolie, Italy. It w

Alessandro, quando hai controllato il Racor sembrava ok, ma l'hai anche sostituto ? E' meglio farlo ogni 50/70 ore. Lo Yanmar ha una pompa forte, mentre quella dell'Onan è più debole. Se hai dubbi fai

Hi Dennis, well, thanks so much for your conforting verification about storage area. I'm planning to leave Eutikia over there next October. All the best and Happy Christmas and ...Buon Vento. Gianni V

Hi Dennis, thanks so much for infos. Which is your opinion about the the cradle. I read some where that may be problem with flood. The hard level is high enough ? Ciao Gianni

HI Dennis & Virginia, I see you are at Bundaberg Marina. Next season I'm planning to sail from NZ to Bundaberg and to leave Eutikia on the hard for hurricane season. Which is please your opinion about

Hi Danny, thanks so much for invaluable explanation ...any way I hope to arrive there before any repair. NZ is better than Raiatea to manage our engine. Yes, I'm planning to move from Tonga at the fir

Hi Danny, I have some vibrations at 1800 rpm and I'm planning to check all trasmission system. About flexible coupling I have new rubber wears as spare, with circular box , from Amel...and I'm plannin

Hi Martin, may you post please pictures in "Amel SM Transmission/C-Drive " folder , second page "Photos" ? all the best Gianni Testa sv EUTIKIA SM2K 428

Hi to all, I have moved the picture " C_DRIVE by AMEL " from first page, folder "General", to second page, folder " Amel SM Transmission/C-Drive " Buon Vento Gianni Testa sv EUTIKIA SM2K 428 Raiatea

HI Kent, I have put a new photo " AMEL_C DRIVE " in "AMEL GENERAL" folder. I took this photo when I was to visit AMEL in La Rochelle.( 2003) I hope that it may..."not"... help you. Buon Vento Gianni s

Hi George & Kim, your sensor may be only dirty, as my one was. Look at the head surface of cilinder, opposite cable side. There are 2 very, very little, quasi invisible, dots. They may be covered with

Hi to all, I have purchased an AIS Icom MA-500 TR ( GPS in box) and a splitter class B Easy Split to use with VHF- Furuno antenna on the mast. You may see how it works from the maker : " the easySplit

Paul, thanks so much for very kind support. Now I know, when I'll be again on board ( Raiatea, CNI ) I try to check. Is it necessary to move back the engine as it seems ? or to remove only the disc an

Hi Paul, what is please " Flex coupling " ? I have some low vibrations at 1800/1900 rpm ( propeller cleaned ) Gianni sv EUTIKIA, SM 2K n 428

Hi to all, do you have some experiences with new navionics app. for I.TAP2 or Samsung Android ? fair winds Gianni sv EUTIKIA

Hi to all, if it may helps : some years ago I had same prolem. A yanmar technician came on board and solved the prolem with little W40 spry in side. You can easly remove the blak rubber cover. Buon ve

Hi Garry, we are now in Panama, Colon. With us an other SM ABORA with the same problem. But we don't have the solution. I'll ask directly to REYA FR. all the best Gianni EUTIKIA ----Messaggio original