Hi Ian, ...many thanks well to know, I will do it, more I'll return from where we started, ;-)) Buon Vento...now no problem. Giovanni ----Messaggio originale---- Da: amelyachtowners@... Da

Hi Jan. as I'm planning to re rig next year at Hyeres returning from around the world, may you please up date me about the work and its cost ? All the best Givanni TESTA sv EUTIKIA SM 428_2004 La Reun

Hi, very sorry for my late...again with a decent wifi at Port Plaisance, La Reunion. Several years ago I ordered, as spare part, an original spiral from Isotemp dealer in Venezia, Italia. Buon Vento G

To all, many thanks for infos and prompt support. It was a hard work to remove the old 3 seals. I had to fix long screws and than to pull them out with a good lever somehow. Best way is to find where

HI, a Yanmar technician suggested me to put 2 valve ( engine side) on 2 connections between engine and boiler so you may, in doubt, to exclude a broken boiler and to use the engine without any problem

To all, I'm on the way to replace the rudder packing...too much leakage after turning the nut twice. I have removed the big white nut, not the hold packing, The issue is that now I see on the bottom a

Hi Olivier, many thanks for infos. Waiting to arrive at an Amel base, as I'm now in Thailand, may I add some how grease from the top ? All the best Giovanni Testa sv Eutikia SM2k 428

Il 04/02/2016 18:26, Beaute Olivier atlanticyachtsurvey@... [amelyachtowners] ha scritto:

...thanks so much Bill. I hope to met you soon sailing Caribbean waters ;-) ! BV Gianni

Hi Bill, first, our congratulation for circumnavigation !...we are on the way crossing the Indian Ocean to SA, next May/June. I'm very curious about your experince with autohelm setup (resp/rudder/win

Ciao to all, same problem about BG/Hydra 2000 (2003) sonic speed and possible solution, Analysis: 2 different BG technicians ( Italy and Thailand) told me that : _ it is very difficult to find the rat

Ciao Jan, the fan works properly, neither I have its relative alarm I had a tecnichan on board (I replaced the ko elec. speed BG with simrad tridata) and he told me that "may be" the dirty connection

Ciao Alan, thanks so much for info. It is the same I was looking for as in Phucket they have a dealer.. The question is that I have to fix it on the wall behind Onan in horizontal position over the Do

Hi to all , my Dolphin carger 24 volt 100 A (2003) has RED signal _electronic controller carger out of service. So, as I'm in Thailand, I think that it is very difficult to service it with new electro

Hi Aldo, twist a rope inside ( from the top) and fix/tension a short line/rope, as high as possible, from foil to boom. ciao Giovanni TESTA sv EUTIKIA SM 428

Hi Alain, many thanks to remember me your post. Unfortunately I have last AMEL gearbox_2003. Any way the procedure may be adapted. About the grease leakage, I had the doubt if the grease is from gearb

Yes, Bill, as I supposed. It is always useful the exchange experinces/ideas. For now it is dripping, so... Thanks K Buon Vento Gianni

Ciao Bill, do you know if it is possible to refill the forestay without removing it ? From the top? which grease? Many thanks Gianni sv EUTIKIA SM 428

Ciao Bill, I wish to check/replace my Lofran 1500 w 24 v brushes. Unfortunately I'm not on board (Thailand) and the local Lofran dealer (Italy) asks me photo and sizes ?! Do you know please the engine

Hi to all, after 11years ( Atlantic and South Pacific Passages)before Indian passage I decided to check my Autohelm Raymarine Linear Type 2 onmy SM 428-2004. It wasworking properly. (more I have a new