Hello Ian How much cost the cuppercoat application for a Super Maramu? On a clean boat ? Best regards Hanspeter, SM16,Tamango 2 Von meinem iPad gesendet Am 09.03.2016 um 16:10 schrieb Ian & Judy ianju

Ken Only my 1 cent input. Why you do not buy an Amel 64 , so as you said "looking for a layout plan that can actually service 4-6 folks in comfort during passages" As I understand you , you talk about

Ok lol Go to buy an amel , you are on the save side of sailing, independent how you finance your dream. Bluewater sailing is a way of life and like for most of us Amel owners (with or without of sea b

Hi Mawgan This is not a easy thing. Because a dive compressor is something you should trust. And a workaround is in my opinon not the right way. From a technical point of view you have 2 options which

Hi Dimitris I think you made only a writing mistake 😉 But for all who are not so acustome with electricity, you shoud write 100 A and 40 A Best regards Hanspeter Von meinem iPad gesendet Am 07.04.2016

Hi Kent do you have the original Amel set up for your 8 115 AH Batteries Bank? The floating Voltage should be 27.2 -27.3 V when Engine, Genset or Landpower or with the 24 V Alternator when motoring af

to check the right way the batteries; each batterie has to be disconnect from the bus. Then wait at least 8 hours to check each batterie with a professional Bat Tester which print you the real status

Ok Kent thanks for your reply I send you some of my recomondation and then we post it in the amel forum. Even if your battery monitor shows in the evening after you used some amps and the voltages goe

Kent, the battery monitor on your boat is ok, since you have the same messurements on all your points you tested; dont worry. I will send you a email for more probleme solving for your case. And then

Paul the amps has to go down; because that is an intelligent system since 80 Years . Your batteries are full! Periode! Learn more to google it ; alternator... smart regulator gives you more input duri

sorry valdeo is valero and that is french from amel. Why your guy buy a french boat and all time critisiem them? hp Tamango 2 ; SM16 Von meinem iPhone gesendet Am 21.06.2016 um 17:56 schrieb osterberg

Hi Eamonn if you are in Greece; maybe you can ask Emek, Riza. He can ship it to you easely. He made for me new Dodger, dark, like the Amel 54. Cost a littel bit, but perfect kr Hanspeter SM #16 Tamang

Hello Niels Why this question? You bougt the SM 351 from the previous owner. And you paied the money you both agreed; is that correct ? and yes I now SM # 351 Hanspeter , SM #16 Von meinem iPhone gese

Hi Paul whow you can get 8.3 A continious during lets say 10 h in Greek with the Emek Solar installation. This is your calculation with 2.05 KWh/ day. and how you can dived kwh/day ??? Hours/day??? An

Hi Stefano Russo is the best in the Med to make your rigging perfect. I liked his proposal. The same price like you and 6 weeks. Unfortunataly I stayed in Turkey and Emek did it for me. My fault; ok;

Hi to all interesting with the thread "Fuel Polishing System" I agree with all comments. I installed by hasard the US- Product AIX product; between the prefilter and the Racor. Ok different ideas(goog

Hi Alexandre where do you put grease in the Tigres Lovean Windlass? My Windlass is 25 Years old and i maintain it every 5 years ( cabels new oil not grease! ) I use my windlass every time often wirh 7

Bill the cone is greased by the oil. read maybe the manuals kr Hanspeter Von meinem iPhone gesendet Am 30.07.2016 um 21:31 schrieb 'Bill & Judy Rouse' yahoogroups@... [amelyachtowners] <amelyac

Thank you Bill and Alexandre Next time I will check if the cones are greased. when I looked at it it was greased and oiled. But I will do like you said. Maybe I was lucky with my windlass even I did n

Hi Paul go asking a proposal at Pantaenius, Hamburg. I'm since 15 years with them. kr Hanspeter SM16, Tamango 2 PS: i do not have any business relations with them. It is only my personal experiance wi