Hello to all, we are new to this group, we joined some days ago and after reading hundreds of messages (great information!) we try our first post :-) this year we bought our Amel Santorin #120 "Kali M

dear all, when we purchased the boat the surveyor recommended to renew the osmosis protection (put down all the old antifouling and paint it with epoxy...) when the boat is complete dry after winter s

Dear Billl, thank you very much for the detailled answer! our santorin is from 1995, i sent a request now to amel-med to check if she has osmosis protection like the sm and will post the answer. how o

Hi, the bed in the saloon is exact 188,6 cm long. I measured it now it is ok to sleep for a person not taller than 180 herbert santorin #120 ---In amelyachtowners@..., <amelyachtowners@yah

servicing the autohelm autopilot (7000) units on my santorin I found out that the Control unit is type 100 and the motor inside the rotary drive is the stronger model the fits to the control unit type

hi jp, did you replace an autohelm 300 or 100 course computer with the x30? did you replace also the ST7000 control unit? what control unit do you use now? does the new system work better than the old

does anybody know what kind of foam (material, quality, strength) amel used for the mattress in the sm or santorin? we could not find such a soft foam material in the shop. thanks, herbert santorin 12

Hi Attilio and Maria, do you have some more photos from your davits? Do you have construction plans? Are you satisfied with the solution? We are thinking of equipping our santorin with davits, too. th

thanks attilio, kali mera is in sukosan until april. then we are looking for an effortable place to leave her until september, if possible reachable by car from vienna (so if you know a good and not t

after considering pros and cons we purchased now a spx300 course computer package with the p70 control unit, serviced the rotary drive and carry the repaired autohelm 100+st7000 as spare parts. any pa

in our santorin we had also problems with water in the forward compartment, the reason were not the bow thruster seals but the pump for the chain washer is leaking... herbert santorin #120, kali mera

we plan to change the standing rigging for our Santorin Kali Mera. The rigger told us that he has to lay down the mast for the rig exchange. At both masts the paint loses colour, if I touch it it is a

Craig and Pat, thank you so much for your answers! We plan to move to nautec marina in monfalcone in april 2014 to leave „kali mera“ for the summer and to finish repairs before going west in autumn. I

We will install a Kenwood 480HX SSB with an MFJ 993BRT automatic antenna tuner on our SN #120. We do not have a HF ground plate (I think that was an only an option for the SN). To ground the antenna T

Hi Attilio, Thx for the information, I will try the KISS-SSB, the Tuner will be mounted at the same point as you have it. If the KISS-SSB is enough grounding then I will not connect it to the rudder,

thanks danny. is there a danger of eletrolytic corrosion when it is used as a HF grounding? I thought that HF would not create these problems. Why would you not connect the SSB ground to the rudder? h

Hi hanspeter, not with this product but we use „grotamar 82“ fair winds herbert, SN #120 Kali Mera, Sukosan Von: amelyachtowners@... [mailto:amelyachtowners@...] Im Auftrag von

Hello JP, where did you mount the SPX30 control unit? In our Santorin the place where the Original Autohelm 300 was fixed does not provide enough space for the SPX30. Do you have any pictures? Fair wi

Thx Ian We took into account to mount it below the sink because there is more space but maybe it is better how you did that. Not a lot of space there. Can you easy remove it? Herbert SN #120 Kali Mera

Bill As far as i know you can also pay monthly. 10 eur per Meter per month. fair winds Herbert Kali Mera SN #120 Sukisan, croatia Von Samsung Mobile gesendet -------- Ursprüngliche Nachricht --------