Hi Bill, I bought a new rig from ACMO in 2014 and it was installled in Turkey 2015. ACMO delivered the complete rig that fitted exactly, I only had to tell them the build number. After having it insta

james, I am not familiar with the Maramu, but the SN and the SM have the bonding connection to the keel with a copper stripe that goes to a keel bolt in the bilge. there is an excellent documentation

hi enio, we have an LEAB 3.200W charger installled. maybe some "overkill" but does its job. typical load current is below 80A when battery charge state is 70% (we do not let them go below 70%, 500AH 1

hi enio, maybe not relevant to your current problem, but eventually some helpful thoughts. I spent some time in finding grounding issues :-) on different santorins (including our own). what I found ou

We had a lot of work done on our santorin in Kusadasi, Turkey. As Daniel already saíd Basar and Zafar (sails and canvas) are very honest and reliable, excellent partners for boat-work and nice and fri

Bob, 2 years ago a got a brand new paddlewheel sensor from B&G, I used it for 3 months and changed then the complete system to Raymarine. I would sell the "as new" B&G sensor, if you are interested co

Hi Ian, where is the membrane and the pump mounted? where is the sea water inlet? If you are in Grenada before May 8th I would be happy to "inspect you installation"! see you, herbert, SN120, KALI MER

Bill, thank you for your generous offer for having an eye on KALI MERA in the summer! I will contact you later regarding that, hope to see you and Judy again then next year! Ian, thanks for your detai

Hi James, I do not know the Maramu well, but the Santorin is very similar to the Super Maramu, it is just smaller but with the same shape (maybe Olivier knows what differences are). Most of the techni

thanks JP, we also changed now the engine and transmission mounts, engine vibrations are gone, but the vibration of the propellor is still there if we are "sailing fast", but now it starts when sailin

before sailing to the pacific next year we want to install a water maker on our santorin, we want to install an echotec 70 l / hour, 220 V. We are still not sure where to install the tube/membran (120

we will leave KALI MERA in Trinidad on the hard for 6 months this summer. Until now we are only experienced how to "winterize" a boat, not to "summerize" it, as we do not know how the boat "behaves" i

KALI MERA is equipped with the Shaft alternator, we like it very much because batteries are always full when we are sailing and it slows down the propellor when sailing, reduces noise (fixed propellor

We made the bottom of KALI MERA last winter in Turkey. All oldpaint including old epoxy protection above the gelcoat has been sanded down,slow and with caution, horrible job that took a week for 2 guy

thanks to all for your answers. @Ian - when you have a quote from clarke's court marine, can you let me know? when you will sail down again would be great to meet! we are currently inh the grenadines

We made the bottom of KALI MERA last winter in Turkey. All oldpaint including old epoxy protection above the gelcoat has been sanded down,slow and with caution, horrible job that took a week for 2 guy

hi all, finally we arrived in the carribean after a relaxed atlantic crossing, sailing with the "twin foresail" all the way from Capo Verde, and now we are looking for a "home for KALI MERA" for the s

one note to my previous message, for fairness: painting the mast has been done in kusadasi by "Basar" with excellent quality, quality problems have been only with "Yakomoz". If anyone plans to make am

Hi Antonio, we changed the standing rigging and painted the mast last winter in turkey. we bought the new rig from ACMO what seemed to be the best and cheapest solution, everything did fit perfect! th

Thank you Bill, I removed the motor as far as I could (on anchor, to take the motor out complete I would have to open all the cables) and put some grease in the gearbox, now it is better, maybe only g