|
[Amel Yacht Owners] Re: Santorin ground strap
Enio Do you have fotos of your keel damage? How does the corrosion on the keel look like? Herbert KALI MERA SN120 Von Samsung Mobile gesendet -------- Ursprüngliche Nachricht -------- Von: "rossienio@
Enio Do you have fotos of your keel damage? How does the corrosion on the keel look like? Herbert KALI MERA SN120 Von Samsung Mobile gesendet -------- Ursprüngliche Nachricht -------- Von: "rossienio@
|
By
Herbert Lackner
· #18461
·
|
|
Santorin ground strap
Ian, our Santorin (120) has a copper strap that runs down the bilge, it has a width of app 3cm and is quite thin. It is in an deplorable condition so I want to change it during winter with a more robu
Ian, our Santorin (120) has a copper strap that runs down the bilge, it has a width of app 3cm and is quite thin. It is in an deplorable condition so I want to change it during winter with a more robu
|
By
Herbert Lackner
· #18459
·
|
|
Santorin ground strap
Hi Enio, the ground strap is a piece of copper that goes down the bilge, I think it is the same position on the Santorin as on the SM. It is quite thin copper strip, we will exchange it to a bigger ve
Hi Enio, the ground strap is a piece of copper that goes down the bilge, I think it is the same position on the Santorin as on the SM. It is quite thin copper strip, we will exchange it to a bigger ve
|
By
Herbert Lackner
· #18457
·
|
|
Propshaft wearing ring
Drew and Lili, we had 200 engine hours since the last seal change (seals have been changed at last haul-out when we purchased the boat - but for sure not the WOB). I think the WOB is has not been chan
Drew and Lili, we had 200 engine hours since the last seal change (seals have been changed at last haul-out when we purchased the boat - but for sure not the WOB). I think the WOB is has not been chan
|
By
Herbert Lackner
· #18434
·
|
|
Rust on keel
Hi Jean-Pierre and Curt, thank you for your answers! Curt, would great if you could upload some photos! Tadeja and Herbert KALI MERA, SN120
Hi Jean-Pierre and Curt, thank you for your answers! Curt, would great if you could upload some photos! Tadeja and Herbert KALI MERA, SN120
|
By
Herbert Lackner
· #18433
·
|
|
[Amel] rust on keel
Thanks Bill ! we will do this this winter, revewing everything, together with scraping down all the old antifouling. Any recommendation for the material? Tadeja and Herbert KALI MERA, SN120
Thanks Bill ! we will do this this winter, revewing everything, together with scraping down all the old antifouling. Any recommendation for the material? Tadeja and Herbert KALI MERA, SN120
|
By
Herbert Lackner
· #18415
·
|
|
Rust on keel
dear group, When we hauled out to change the shaft-seals I found out (after cleaning the bottom) that there are many small (and some bigger) rust-stains on the keel. https://groups.yahoo.com/neo/group
dear group, When we hauled out to change the shaft-seals I found out (after cleaning the bottom) that there are many small (and some bigger) rust-stains on the keel. https://groups.yahoo.com/neo/group
|
By
Herbert Lackner
· #18411
·
|
|
[Amel Yacht Owners] Re: Propshaft wearing ring
This summer we had water in the drive-oil (milky) so we hauled and changed the sealings. We found out that there was a steel wearing ring and not the brass ring from Amel. When the seals have been cha
This summer we had water in the drive-oil (milky) so we hauled and changed the sealings. We found out that there was a steel wearing ring and not the brass ring from Amel. When the seals have been cha
|
By
Herbert Lackner
· #18409
·
|
|
[Amel Yacht Owners] Re: Leaking toilet pumps
Hi Malcom, we have also the RM69 on our Santorin. All parts are available, if you are in Europe you could use this link http://www.svb24.com/en/rm69-manual-marine-toilet.html If the pump has not been
Hi Malcom, we have also the RM69 on our Santorin. All parts are available, if you are in Europe you could use this link http://www.svb24.com/en/rm69-manual-marine-toilet.html If the pump has not been
|
By
Herbert Lackner
· #17870
·
|
|
[Amel Yacht Owners] Re: Santorin Balooner
Dear group, Thanks to Dave, Craig, Bill and Joe for the responses and the information. On our Santorin (1995) we have the same system as the SM, we have the two plastic pieces (mouse…). As a response
Dear group, Thanks to Dave, Craig, Bill and Joe for the responses and the information. On our Santorin (1995) we have the same system as the SM, we have the two plastic pieces (mouse…). As a response
|
By
Herbert Lackner
· #17821
·
|
|
Santorin Balooner
dear group, we am looking for a balooner for our 1995 Santorin, should be like the original that can be used in the “amel twin sail configuration”. We purchased KALI MERA without the balooner and want
dear group, we am looking for a balooner for our 1995 Santorin, should be like the original that can be used in the “amel twin sail configuration”. We purchased KALI MERA without the balooner and want
|
By
Herbert Lackner
· #17794
·
|
|
[Amel Yacht Owners] Lights on Bow Thruster
Hi Alexandre, on our Santorin the lights turn ON to indicate that the fully up / down position is reached. When I move the up/down switch to the middle position the lights turn OFF again. Fair winds H
Hi Alexandre, on our Santorin the lights turn ON to indicate that the fully up / down position is reached. When I move the up/down switch to the middle position the lights turn OFF again. Fair winds H
|
By
Herbert Lackner
· #17620
·
|
|
[Amel Yacht Owners] Re: Icom M802 and AT140 tuner grounding
Good Morning to all, Alans 2nd option was what I wanted to explain :-) On our SN we do not have a separate HF ground (I think this was an option that the first owner did not order from amel), the copp
Good Morning to all, Alans 2nd option was what I wanted to explain :-) On our SN we do not have a separate HF ground (I think this was an option that the first owner did not order from amel), the copp
|
By
Herbert Lackner
· #17146
·
|
|
[Amel Yacht Owners] Re: Icom M802 and AT140 tuner grounding
If you want to be on the safe side you can put 10 small ceramic capacitors with 3900pF (2500V) each, solded together in parallel (will give 39nF(2500 V) with little Skin Effect) between the tuner grou
If you want to be on the safe side you can put 10 small ceramic capacitors with 3900pF (2500V) each, solded together in parallel (will give 39nF(2500 V) with little Skin Effect) between the tuner grou
|
By
Herbert Lackner
· #17141
·
|
|
[Amel Yacht Owners] Range of AIS
Dear all, I invested some time on my AIS and would like to share my findings, maybe that will answer Pat’s question and will add some info to Bob’s mail. (just for info: there are so many things regar
Dear all, I invested some time on my AIS and would like to share my findings, maybe that will answer Pat’s question and will add some info to Bob’s mail. (just for info: there are so many things regar
|
By
Herbert Lackner
· #16197
·
|
|
[Amel Yacht Owners] Range of AIS
Trying to summarize: Receiving mode: · General the splitter is splitting the signal to two (or more) receivers. If the signal - that has been splittet up – is not amplified again you loose 3dB (50% -
Trying to summarize: Receiving mode: · General the splitter is splitting the signal to two (or more) receivers. If the signal - that has been splittet up – is not amplified again you loose 3dB (50% -
|
By
Herbert Lackner
· #16171
·
|
|
[Amel Yacht Owners] Jdrex s40 L connector and manual bilge pump henderson
Thank you for your answers, these fittings seem to be not so common here in europe, could not find any hardware shop in vienna that is willing to sell it to me... but finally i could order them here h
Thank you for your answers, these fittings seem to be not so common here in europe, could not find any hardware shop in vienna that is willing to sell it to me... but finally i could order them here h
|
By
Herbert Lackner
· #16109
·
|
|
[Amel Yacht Owners] Jdrex s40 L connector and manual bilge pump henderson
The JDREX L piece that I need is 25mm on both sides, Thanks, Herbert Am 17.03.2014 um 13:41 schrieb Herbert Lackner <herbert@...>:
The JDREX L piece that I need is 25mm on both sides, Thanks, Herbert Am 17.03.2014 um 13:41 schrieb Herbert Lackner <herbert@...>:
|
By
Herbert Lackner
· #16102
·
|
|
Jdrex s40 L connector and manual bilge pump henderson
1. ) I am looking for a source to buy the PVC L connector for the JDREX S40 pump for the anchor wash (3/4 thread and 3/4 hose). Can only find one out of brass and that seems to be no good idea. 2.) do
1. ) I am looking for a source to buy the PVC L connector for the JDREX S40 pump for the anchor wash (3/4 thread and 3/4 hose). Can only find one out of brass and that seems to be no good idea. 2.) do
|
By
Herbert Lackner
· #16101
·
|
|
[Amel Yacht Owners] Re: Super Maramu standing rigging replacement
Hello, we emailed with Sylvie Gazzurelli (phgazzurelli@...) and received answers within some days. Sylvie speaks English. herbert Kali Mera, SN120, Sukosan Von: amelyachtowners@... [ma
Hello, we emailed with Sylvie Gazzurelli (phgazzurelli@...) and received answers within some days. Sylvie speaks English. herbert Kali Mera, SN120, Sukosan Von: amelyachtowners@... [ma
|
By
Herbert Lackner
· #16077
·
|