|
Rigid Propeller Santorin
Hi bernd, Yes, if the shaft alternator is not in use (it is used most of the time) the gear is in reverse. When the batteries are full during sailing or when the speed is too high we turn the alternat
Hi bernd, Yes, if the shaft alternator is not in use (it is used most of the time) the gear is in reverse. When the batteries are full during sailing or when the speed is too high we turn the alternat
|
By
Herbert Lackner
· #46306
·
|
|
Cleaning Santorin Diesel tank
#Wiki
Hi Amelians, Short status to our „water in the tank adventure”. After draining and draining no more water came out even after a 7 hours testrun, so we decided to sail from Costa Rica to Mexico, we tho
Hi Amelians, Short status to our „water in the tank adventure”. After draining and draining no more water came out even after a 7 hours testrun, so we decided to sail from Costa Rica to Mexico, we tho
|
By
Herbert Lackner
· #45138
·
|
|
Oil amount for MD22 / Prima M50
after cleaning all diesel filters and before cleaning up the engine room I made an oil / filter change. This time I made sure that all the oil comes out, including the small amount at the bottom (1/4
after cleaning all diesel filters and before cleaning up the engine room I made an oil / filter change. This time I made sure that all the oil comes out, including the small amount at the bottom (1/4
|
By
Herbert Lackner
· #44981
·
|
|
Cleaning Santorin Diesel tank
#Wiki
Hi Amelians, just started to cross the pacific, after three days without wind, lot of waves and using the engine the water separator and the racor filter have been full of brown water. I cleaned it se
Hi Amelians, just started to cross the pacific, after three days without wind, lot of waves and using the engine the water separator and the racor filter have been full of brown water. I cleaned it se
|
By
Herbert Lackner
· #44945
·
|
|
Heat Exchanger -- Volvo MD22 - Perkins Prima M50
@Craig, it is 54mm, the sleeve is about 1-2 mm (already installed, cannot measure it). it gives an exact fit of the tube and the baffle plate. @Ian: we used this, fit perfect. we have an 1995 MD22A-L
@Craig, it is 54mm, the sleeve is about 1-2 mm (already installed, cannot measure it). it gives an exact fit of the tube and the baffle plate. @Ian: we used this, fit perfect. we have an 1995 MD22A-L
|
By
Herbert Lackner
· #43852
·
|
|
Heat Exchanger -- Volvo MD22 - Perkins Prima M50
solved: After some "sleeve" research I am now sure that the sleeve has to be installed following the workshop manual. I is a little bit tricky to get it to the right place it but in the end all seems
solved: After some "sleeve" research I am now sure that the sleeve has to be installed following the workshop manual. I is a little bit tricky to get it to the right place it but in the end all seems
|
By
Herbert Lackner
· #43850
·
|
|
Heat Exchanger -- Volvo MD22 - Perkins Prima M50
Hi Craig, if you do not have a sleeve installed then the tube goes through the baffle plate with some space (~1-2 mm) left between the plate and the tube. that means that not all the cooling liquid wi
Hi Craig, if you do not have a sleeve installed then the tube goes through the baffle plate with some space (~1-2 mm) left between the plate and the tube. that means that not all the cooling liquid wi
|
By
Herbert Lackner
· #43845
·
|
|
Heat Exchanger -- Volvo MD22 - Perkins Prima M50
one of the end caps of the heat exchanger failed, so I had to replace it. I took the chance to examine and clean the complete system. I had all spare parts and the engine-repair-manual, so no problem.
one of the end caps of the heat exchanger failed, so I had to replace it. I took the chance to examine and clean the complete system. I had all spare parts and the engine-repair-manual, so no problem.
|
By
Herbert Lackner
· #43843
·
|
|
Bottom job prior to the Panama Canal
bottom paint: you can order AF in Panama at Marine Warehouse, Arturo, in Panama City. He delivers to Shelter Bay. you can also buy AF in the duty free zone in Colon. herbert, SN120
bottom paint: you can order AF in Panama at Marine Warehouse, Arturo, in Panama City. He delivers to Shelter Bay. you can also buy AF in the duty free zone in Colon. herbert, SN120
|
By
Herbert Lackner
· #43382
·
|
|
Bottom job prior to the Panama Canal
Hi Thomas, we ordered trojan batteries in Colon, "Casa de las baterias" in 4Altos, prices are good, 10% discount if you leave your old batteries there. in french polynesia you can buy batteries relati
Hi Thomas, we ordered trojan batteries in Colon, "Casa de las baterias" in 4Altos, prices are good, 10% discount if you leave your old batteries there. in french polynesia you can buy batteries relati
|
By
Herbert Lackner
· #43381
·
|
|
Marinas / harbours in Hawaii
Thx Brent and Steve. I watched the videos and will meet Steve in Hawaii :-) herbert
Thx Brent and Steve. I watched the videos and will meet Steve in Hawaii :-) herbert
|
By
Herbert Lackner
· #42979
·
|
|
Marinas / harbours in Hawaii
Hi all, on our way from Panama to Alaska (starting beginning of 2019) we want to stop for ~ 2-3 months in Hawaii (March- May). Has anyone some recommendations where to stay with the boat? Is it necess
Hi all, on our way from Panama to Alaska (starting beginning of 2019) we want to stop for ~ 2-3 months in Hawaii (March- May). Has anyone some recommendations where to stay with the boat? Is it necess
|
By
Herbert Lackner
· #42972
·
|
|
Santorin spinnaker question
Hi Olivier, thx for the pictures, this was exactly what I was looking for. I will do it in a similar way. you are always such a great help! herbert SN120 KALI MERA
Hi Olivier, thx for the pictures, this was exactly what I was looking for. I will do it in a similar way. you are always such a great help! herbert SN120 KALI MERA
|
By
Herbert Lackner
· #41736
·
|
|
Santorin spinnaker question
thanks Alan! that seems to be a strong Aluminium extension to the Mast-Head, professional solution. Cannot do that now, but maybe a stainless steel plate, screwed on the masthead, with rubber between
thanks Alan! that seems to be a strong Aluminium extension to the Mast-Head, professional solution. Cannot do that now, but maybe a stainless steel plate, screwed on the masthead, with rubber between
|
By
Herbert Lackner
· #41643
·
|
|
Santorin spinnaker question
when we purchased KALI MERA in 2013 shewas equipped with a Parasailor instead of the Amel balooner. An additional block was mounted on the top of the mast and the halyard for the balooner was fed up t
when we purchased KALI MERA in 2013 shewas equipped with a Parasailor instead of the Amel balooner. An additional block was mounted on the top of the mast and the halyard for the balooner was fed up t
|
By
Herbert Lackner
· #41598
·
|
|
[Amel Yacht Owners] Re: Drawer/cupboard pulls
we would take 5 in Aluminium or ABS, whatever the rest takes. thx, Herbert Tadeja and Herbert KALI MERA SN120 Panama, Shelter Bay
we would take 5 in Aluminium or ABS, whatever the rest takes. thx, Herbert Tadeja and Herbert KALI MERA SN120 Panama, Shelter Bay
|
By
Herbert Lackner
· #41337
·
|
|
[Amel Yacht Owners] Re: Steering Failure on 1992 SM72 "Aloha"
Hi Bill, I think I could not express myself very clear, try to say it again, sorry for my English: when the rudder is moved by the rotary drive (or by the steering wheel) it moves very smooth, you can
Hi Bill, I think I could not express myself very clear, try to say it again, sorry for my English: when the rudder is moved by the rotary drive (or by the steering wheel) it moves very smooth, you can
|
By
Herbert Lackner
· #40814
·
|
|
[Amel Yacht Owners] Re: Steering Failure on 1992 SM72 "Aloha"
maybe a stupid question from a SN owner: when adding a linear drive -- the rotary steering system stays exactly the same, no changes, is that right? No need to disconnect the cables when switching to
maybe a stupid question from a SN owner: when adding a linear drive -- the rotary steering system stays exactly the same, no changes, is that right? No need to disconnect the cables when switching to
|
By
Herbert Lackner
· #40812
·
|
|
Two questions
Hi Paul, we changed all electronics to raymarine 4 years ago. I removed the ground after having strange behaviour of the system, is running fine now since 4 years without ground. Was in contact with r
Hi Paul, we changed all electronics to raymarine 4 years ago. I removed the ground after having strange behaviour of the system, is running fine now since 4 years without ground. Was in contact with r
|
By
Herbert Lackner
· #39986
·
|
|
[Amel Yacht Owners] Re: genua traveller pulley
thx John and Bill, I checked now the Antal product range, 801.060 might fit. As I am not on the boat and want to organize everything before returning to the boat and going to the pacific, maybe there
thx John and Bill, I checked now the Antal product range, 801.060 might fit. As I am not on the boat and want to organize everything before returning to the boat and going to the pacific, maybe there
|
By
Herbert Lackner
· #39630
·
|