|
Gearbox for outhaulAmel
Loosen the spectra lines that attach the line to the car
Loosen the spectra lines that attach the line to the car
|
By
Joerg Esdorn
· #48206
·
|
|
Gearbox for outhaulAmel
Thanks very much, Bill. At the suggestion of another owner, I checked the tension of the outhaul line and found it to be iron tight. Apparently the lines shrink a bit over the years. This puts a lot o
Thanks very much, Bill. At the suggestion of another owner, I checked the tension of the outhaul line and found it to be iron tight. Apparently the lines shrink a bit over the years. This puts a lot o
|
By
Joerg Esdorn
· #48204
·
|
|
Solar and shade
Thanks very much for every one’s thoughts! Joerg Esorn
Thanks very much for every one’s thoughts! Joerg Esorn
|
By
Joerg Esdorn
· #48165
·
|
|
Gearbox for outhaulAmel
For a few weeks or possibly months, the outhaul furler has been slower than the main furler on my A55. Amel had me check the current limiter - it’s ok - and then had me check the current when furling.
For a few weeks or possibly months, the outhaul furler has been slower than the main furler on my A55. Amel had me check the current limiter - it’s ok - and then had me check the current when furling.
|
By
Joerg Esdorn
· #48164
·
|
|
Solar and shade
very helpful, yes, thanks much Paul. I have 400W in the same space - that's an easy upgrade. I figure I can install at least 500W on the wheel house. Space available over the fixed portion up to the o
very helpful, yes, thanks much Paul. I have 400W in the same space - that's an easy upgrade. I figure I can install at least 500W on the wheel house. Space available over the fixed portion up to the o
|
By
Joerg Esdorn
· #48149
·
|
|
Solar and shade
Thanks guys. I may upgrade the stern panels as well but I am concerned about windage, waves and esthetics. So for me, I will never have enough solar to run the entire boat at anchor. At sea, I have hy
Thanks guys. I may upgrade the stern panels as well but I am concerned about windage, waves and esthetics. So for me, I will never have enough solar to run the entire boat at anchor. At sea, I have hy
|
By
Joerg Esdorn
· #48144
·
|
|
Solar and shade
I’m thinking about where to add more solar to my boat and the wheel house of the A55 is an obvious place. Problem is that the space is often shaded by the boom, particularly at anchor. Would it help t
I’m thinking about where to add more solar to my boat and the wheel house of the A55 is an obvious place. Problem is that the space is often shaded by the boom, particularly at anchor. Would it help t
|
By
Joerg Esdorn
· #48118
·
|
|
Berth in Lisbon area
Just got notice that Cascais has room for Kincsem. Many thanks for everyone’s advice. Maybe Jose you did something to make this happen? Many thanks!! Joerg Esdorn A55 Kincsem
Just got notice that Cascais has room for Kincsem. Many thanks for everyone’s advice. Maybe Jose you did something to make this happen? Many thanks!! Joerg Esdorn A55 Kincsem
|
By
Joerg Esdorn
· #48054
·
|
|
[EXTERNAL] - [AmelYachtOwners] Berth in Lisbon area
Thanks I am aware of the anchorage and that’s where I am headed if I don’t find a berth somewhere. Jose, thanks for the offer but if you don’t have a permanent berth in Cascais, There is no point in c
Thanks I am aware of the anchorage and that’s where I am headed if I don’t find a berth somewhere. Jose, thanks for the offer but if you don’t have a permanent berth in Cascais, There is no point in c
|
By
Joerg Esdorn
· #48034
·
|
|
Berth in Lisbon area
Thanks very much for the responses. I am waitlisted at cascais, Oreias and Parque Naciones marinas but I was hoping someone had a permanent berth anywhere in Lisbon and was not using it currently. I’v
Thanks very much for the responses. I am waitlisted at cascais, Oreias and Parque Naciones marinas but I was hoping someone had a permanent berth anywhere in Lisbon and was not using it currently. I’v
|
By
Joerg Esdorn
· #48033
·
|
|
Berth in Lisbon area
We are on our way up the West Coast of Portugal and would like to stay in Lisbon for 10 days beginning September 25 or 26. We’ve been unable to make a reservation at Cascais or any of the other marina
We are on our way up the West Coast of Portugal and would like to stay in Lisbon for 10 days beginning September 25 or 26. We’ve been unable to make a reservation at Cascais or any of the other marina
|
By
Joerg Esdorn
· #48020
·
|
|
Dishwasher top loading
No it replaces two drawers - no 2 and 3 from top. I haven’t installed it - still thinking about it. Joerg
No it replaces two drawers - no 2 and 3 from top. I haven’t installed it - still thinking about it. Joerg
|
By
Joerg Esdorn
· #47930
·
|
|
Reckman EF90 Genoa furler
Type 2 for both Genoa and staysail. Joerg Esdorn A55 #53 Kincsem
Type 2 for both Genoa and staysail. Joerg Esdorn A55 #53 Kincsem
|
By
Joerg Esdorn
· #47929
·
|
|
Dishwasher top loading
Hi Paul, this is the unit Amel installs now. BOSCH SKT 5102. Let me know how you like it!! joerg Esdorn A55#53 Kincsem currently in Sevilla
Hi Paul, this is the unit Amel installs now. BOSCH SKT 5102. Let me know how you like it!! joerg Esdorn A55#53 Kincsem currently in Sevilla
|
By
Joerg Esdorn
· #47926
·
|
|
Cleaning your Amel
i received the attached from Amel. I cannot overstate how great the Wichinox stainless cleaner works - I’ve tried most every product on the market and this one is So MUCH easier because it combines a
i received the attached from Amel. I cannot overstate how great the Wichinox stainless cleaner works - I’ve tried most every product on the market and this one is So MUCH easier because it combines a
|
By
Joerg Esdorn
· #47911
·
|
|
Converting my Amel 54 to lithium batteries: what I did, what I like and what I don't like (after one year of full time live aboard use)
Thanks, Scott. Lots to think about. What happened on my overcharging episode was that the sensing wire was loose at the alternator. Result was that the voltage read by the regulators was some 3V lower
Thanks, Scott. Lots to think about. What happened on my overcharging episode was that the sensing wire was loose at the alternator. Result was that the voltage read by the regulators was some 3V lower
|
By
Joerg Esdorn
· #47883
·
|
|
Converting my Amel 54 to lithium batteries: what I did, what I like and what I don't like (after one year of full time live aboard use)
Thanks again, Scott, for all your thoughts and help on this topic. I wanted to share with the group a quite technical article I downloaded quite some time ago based upon advice from the Delos guys. Th
Thanks again, Scott, for all your thoughts and help on this topic. I wanted to share with the group a quite technical article I downloaded quite some time ago based upon advice from the Delos guys. Th
|
By
Joerg Esdorn
· #47871
·
|
|
Amel is going lithium
Sorry, Ofer. It appears I didn’t post the pics. Here they are. Sorry for the delay.
Sorry, Ofer. It appears I didn’t post the pics. Here they are. Sorry for the delay.
|
By
Joerg Esdorn
· #47849
·
|
|
When to use Running Back Stays and Onan Control Board PCB
Another try to attach the pictures.
Another try to attach the pictures.
|
By
Joerg Esdorn
· #47848
·
|
|
Converting my Amel 54 to lithium batteries: what I did, what I like and what I don't like (after one year of full time live aboard use)
Thanks very much, Scott. Excellent write-up. I have a few questions and comments. 1. The A55 comes with a switch that in the "on" position, turns on the generator automatically if the SOC goes below 6
Thanks very much, Scott. Excellent write-up. I have a few questions and comments. 1. The A55 comes with a switch that in the "on" position, turns on the generator automatically if the SOC goes below 6
|
By
Joerg Esdorn
· #47798
·
|