Its just New York slang pronounced cant hoit, cant hurt

Can’t Hoit !!

While Sailing West of Africa towards the Caribbean we were surfing down the waves in the Trade Winds using our gennaker one day we averaged 10 knots. At first, I did not see it, But I hit a whale in t

I recall a discussion about a hole in this bulkhead where wires and pipes pass through. It is supposed to be located low outboard of the bulkhead on the port side . It is supposed to be visible from t

Nicolas, Amel delivers the boat with no holes in the heating tube in the head. Ian and Judy on PenAzen had the factory drill holes in the tubing in the head. It was a great idea, so I had Amel do the

I would also pound on it with a heavy mallet and use plenty of PB Blaster.

Ruedi, I don’t know the configuration of the 54 but on the 53 you cannot remove the bolt without cutting it – therefore you cannot put a bolt back in. Possibly the 54 is different. Fair Winds Eric Kim

Sorry the word is DISK

I forgot to mention, I just replaced my engine with the new model of the 4JH3 with a 4jh4. The disk came off easily after having it machined 4 years ago. Fair Winds Eric Kimberlite Amel Super Maramu #

Hi Ruedi, Yes, you must cut the existing bolts. You use threaded rod and nylocks to replace the bolts. When you have the disk off , have a machine shop cut a few thousands of an inch off the interior

Craig, I hope you received my email. Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi Billy, I have an air conditioning genius that works here on eastern Long Island . He also installs Espar heaters. He is installing one on my friend’s 54 as I write. Where are you located? Climma pa

Hi Mike, What furling motor is this? Main or Genoa? Fair Winds Eric sm

Have any members experienced the watertight door pulling away from the seal at the top when the crossbar is attached? Fair Winds Eric Kimberlite Amel Super Maramu #376 From: main@...

Pat , I use a reverse oil change pump. Or you could put a bucket in the bilge, remove the fittings at the bottom of the tank and add a piece of hose. On Kimberlite I needed to use a very thin wrench t

Sorry to hear the news. Get better soon. Spring is here. Fair Winds Eric Kimberlite Amel Super Maramu #376

Pat, Thank you. Good Idea !!! Fair Winds Eric Kimberlite Amel Super Maramu #376

I am glad my suggestion might help; I used an air horn. It puts out a lot more pressure. The filter that Amel puts at the outlet inside of the fuel tank is an odd place to put a filter. Fair Winds Eri

I forgot to ask ; did you remove all inspection ports? From what did you make the new gaskets ? Fair Winds Eric Kimberlite Amel Super Maramu #376 From: main@AmelYachtOwners.groups.io On Behalf Of Thom

Hi Tom, Did you remove and clean the filter inside the bottom of the tank? Fair Winds Eric Kimberlite Amel Super Maramu #376