Is this a 220 volt unit or do you run it off of an inverter? The only issue I see with the one attached is the starting amps is 12.5. It looks like a great pump ; however it does have an impeller.. Ou

In addition to Bill’s comments , you should also buy the belts as a matched pair. They are available in that configuration. The belts will then be equally tight. Fair Winds Eric Kimberlite Amel Super

Hi, What model Amel do you have? Fair Winds Eric Kimberlite Amel Super Maramu #376

Pierre, Thank you ! Fair Winds Eric Kimberlite Amel Super Maramu #376

HI Bill. I use a piece of PVC pipe probably 2 inch. I take a small sledge hammer and with molycote the inside walls of the stuffing box I pound each piece of packing one at a time in place. This works

Hi Pierre, These atch repair plates look great. Did you have them made in a machine shop? Do you have the dimensions? Fair Winds Eric Kimberlite Amel Super Maramu #376

“wholly independent and presently boasts a majority of local shareholders. Netherlands currently serves the insurance needs of over 3,000 individuals, families and businesses in Grenada and Antigua an

Hi Bill. Also, what is their contact info? Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi Bill, What are your Navigation limits and dates? Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi Michael, Once the engine is aligned with the tool using feeler gauges it is aligned. By lifting the engine and replacing it without the alignment tool does nothing to the alignment. The alignment t

#alignment

Hi Michael, Some of the following might not apply if you do not have a disk brake. The alignment is straight forward but slightly complicated. The engine must be disconnected from the C drive and coup

#alignment

Hi Giovanni, Sorry, I am not on Kimberlite now. Please send me a note about May 16 and I will get you the dimensions. Fair Winds Eric Kimberlite Amel Super Maramu #376

I forgot to mention that I purchased a short piece of PVC pipe. I use the same piece of pipe to tighten the packing when I change it, and also install the lip seals in the C drive. Fair Winds Eric Kim

I didn’t want to confuse the group, but I have had a 5-ring stuffing box for years. The only modification that I made besides making the stuffing box taller is I made it wider. On my stuffing box ther

Hi Dave, I couldn’t Open the photo. Fair Winds Eric Kimberlite Amel Super Maramu #376

I found that those plumbers basin wrenches slip on the packing nut and distort it. They also do not keep their setting well for the size of the nut. They are also rather short to work under a moving r

A 15 dollar Chinese high water sensor is a great investment for that area. Ebay-- I fabricated this wrench out of ¼ inch aluminum with a band saw and a bench grinder. It is just the right size to swin

Hi Colin, Instead of dealing with 9 jerry cans , why not have a pair of tanks fitted to the locker as we have done . We use an electric pump to empty the tanks. That is much easier than having to deal

Sorry, The internet is terribly slow here and I ave to send multiple emails. Brass Body with Lockable Lever Handle—Straight Female × Female Valve Type: Ball For Use With: BSPP: Water, Oil, Air, Argon,

Hi Mark, We usually mount a 50-gallon bladder to the cabin top in addition to having 2 aluminum 40 gallon tanks fitted into the life raft locker. 50 Gallons of diesel weighs about 350 pounds. That is