Hi Bertrand, Many Amel’s use the 50 amp plug, mine included for over 19 years. You need a 50 amp twist lock plug. You do not use the neutral wire connection. In the USA it is white in the plug. You us

#alignment

Bertrand, Does the marina have a 50 amp 220 volt plug? Fair Winds Eric Kimberlite Amel Super Maramu #376

#alignment

Hi Mike, I do not have an ohm meter here. Please check your parts manual. It would not be cost effective to ship to NZ. I Have 1 switch left now. Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi Amelians, I have broken this sensor reaching behind my MDKAV generator a few times. A while ago I ordered some for the group. I believe it is available for $70-=$90- US., from Onan. I have a few le

Hi James, The hose can be made by any hydraulic shop. It is quite easy and inexpensive. Get one with a reinforced steel braid. On Kimberlite I just looked at the existing one and ordered a spare onlin

#stove

Hi Bill, Where did you get that? Is it painted or powder coated? Fair Winds Eric Kimberlite Amel Super Maramu #376

Patrick, Just make sure that the hydraulic hoses they use are not reinforced with any form of steel mesh. Many have a blue hose that is rated for high pressure and they can reuse your JIC fittings. Th

Pat, Most hydraulic shops can make you a new one in 15 minutes. Fair Winds Eric Kimberlite Amel Super Maramu #376

Bill, Amel also did mine. They used my spare packing nut with release on it and laid up the extension. It is a bit longer than 2 pieces of packing. It is the same diameter as the original stuffing box

Hi James, I had extremely good luck with my Yanmar 4jh3hte engine . With over 7500 hours I decided I did not want to change it to an electronic engine I did not have one problem with old the engine..

Hi Craig, I couldn’t find it. Do you have a link? Fair Winds Eric Kimberlite Amel Super Maramu #376

Clive, I used to build waveguide, slotted line , and rotary joints for different agencies. If you send a few hundred megawatt pulse down a rotary joint and there is .00001 ohms insertion loss. They wi

If you really want to be confused, explain how microwave signals move down waveguide (like in your radar) and why are the dimensions of the waveguide critical for different frequencies . Like s band k

Pat, I ran across an interesting issue that might be of help to you. Open the AC panel. You will note that there is a bus bar connecting the breakers. It is held on by just the friction of the contact

Sorry, I thought he was speaking of the Climma units. Fair Winds Eric

These are photos that Maude sent me about 10 years ago of the spares that Amel had in stock at the time. JUST a FYI. Fair Winds Eric Kimberlite Amel Super Maramu #376 -----Original Message----- From:

Hi Kevin, I had this problem with Kimberlite a few years ago. That Autopilot was always noisy. I have had them on 3 boats. Does the autopilot make the same noise when the wheel is turned to a differen

There is also an agent around the corner from Amel who fills out a forms for I think a few hundred euros and you are not charged VAT for whatever you do no your boat. Fair Winds Eric Kimberlite Amel S

Twice a year I put a hose clamp on the bow thruster body and remove the 4 bolts that hold the motor to the thruster.I drop the thruster and apply a lot wheel bearing grease to the bearing in the motor

I had my rigging changed in Martinique 3 years ago. I also had Amel rebuild the Genoa furler. This was after about 75,000 miles. When they took the furler apart they noticed my grease fittings and the