New Super Maramu Owner We bought SM#69 „Yin Yang“ in October 2014 but have been reading the postings since a long time because we were always interested in a SM. In the process of purchasing we got ve

Hi Ron I had the same problem on my Super Maramu. The reason was a lose wire on the backside of the engine controll panel. Leo SM#69 Yin Yang Von meinem iPad gesendet Am 11.02.2015 um 17:02 schrieb ro

Hi to everyone and the NIKIMAT- owner, I saw the picture of the dive-compressor installation by NIKIMAT and would like to do the same on my SM#69 . Could you give me the measurements please? Mainly th

Hi Steve, Do you want me to call Schabauer? We are in Austria - no problem for us to establish communication between them and you! Regards, Leo SM 69 Yin Yang Von meinem iPad gesendet Am 01.05.2015 um

Hi Steve, I cannot find part 034015 on the website. Can you confirm that the part you are looking for is the program timer. Since there is a holiday in Austria today i cannot contact them before Monda

Hi Steve I talked to Schabauer this morning. Your Timer is not available any more. Could you check if you have an EATON ( white ) timer or a Siemens ( metallic and brown ). Schabauer says that EATON u

Hi Steve I talked yesterday with Schabauer again, and translated him your failure description. His assumption is a corrosion problem on a contact in the programmtimer or in the level switch ( Tafel 6

Hello, does anyonehave a wire diagramm that shows how to connect a NMEA Paddle wheel (Tinleymarine electronics) with the B+G instruments? I wouldlike to know how to join which cable to which color. Ma

Hi Bill Thank you for your explanation. It means that the Tinley Paddlewheel transforms the NMEA GPS speed sentence to the same signal as a real Paddlewheel, and not to a NMEA sentence speed thru wate

Hi experts, we are having a problem with the B&G windspeed: Last summer it stopped worrking suddenly and I checked the cables and contacts in the junction box on the board above the front cabin door.

Hello to the forum, Does anyone knowwhere we can get a HARKEN B130 smallbell socket? The dealer told us at the boat fair that they wouldn'tproduce it any more and it also doesn't show in the Harken ca

Hi everyone, my SM # 69 is from 1992 and still has the batteries in the engine room. Since this (in combination with most of the lockers and the dive compressor being on the same side) causes a visibl

Hello Colin I'm interested on your pictures, please make an upload. Leo YinYang, SM#69 Austria Von meinem iPad gesendet Am 19.02.2017 um 10:49 schrieb SV Island Pearl II colin.d.streeter@... [am

We have these membrane changes ahead of us. Are you going to describe the procedure as you always do so brillantly? Sorry I am not sure about the O rings either. Regards, Leo SM 69 Yin Yang Am 17.03.2

Thank you Bill, I hope you are fine. Best regards Leo YinYang SM #69 Von meinem iPad gesendet Am 22.03.2017 um 23:14 schrieb yahoogroups@... [amelyachtowners] <amelyachtowners@...>:

Hi everyone, We have a "well" in the pantry bilgesof our SM ( hull 69) : In higher waves, especially with wind from ahead , weget water ( definitely NO saltwater) in the compartment with the freshwate

Hi Steve, Good to hear that we are not the only one's with that problem. Since we hardly use neither the aircondition nor the freezer we think that it is also the water tank inspection port under the

Look at www.SVB.de Part Nr. 11637 Best regards Leo SM YinYang #69 Von meinem iPad gesendet Am 13.09.2017 um 13:47 schrieb mark_pitt@... [amelyachtowners] <amelyachtowners@...>:

Hi everyone, I had to buy new bow side cleats. To get screws for them I should know the thickness of the deck on the side area of the bow. Does anybody know? The new cleats are from SVB, but they are

Hi, We are going to be in Le Marin too, for a month from about jan 6th., and are having a problem with the genua furler gear box. Would be great to know if Amel has spare parts for it there? Any idea