Hi Scott; Anything with bleach will be effective on mildew/mold. I would star with regular house bleach diluted at a ratio of 10 to 1 and work your way until it is effective. I would try it in an inco

Thanks Nicolas; We have pulled and serviced ours a couple of years ago, and did not have any issues. Hoping for the same this time, as we will be doing this in water. Respectfully; Mohammad Shirloo +1

Thanks Gary. I watched all 7 a few hours ago, as a refresher. Respectfully; Mohammad Shirloo +1-323-633-2222 Cell +1-424-644-0908 Fax

Thanks for the responses. I talked to Bruntons and they agree that it is either the adjustment nut or the bearings may have seated since the rebuild. We are planning on removing the prop in water, mak

We may need to haul out due to an issue with our Brunton prop. While hailed we will do the bottom paint and C-drive seal and oil change too. Would appreciate recommendations for good haul out location

Hi everyone; While diving to clean the hull and the prop, I noticed that one of the blades rocks back and forth about 1/8” to 1/4”. The other two are tight. The blades had new bearings installed in 20

Hi Kent; We have selected the yacht-sentinel. An outfit out of the UK. It has all the functionality you are looking for and more. It is wireless, so it installs very quickly. It has a lot of sensor op

Hi everyone; We’re back on board after 1-1/2 years. Many minor issues resolved. The washing machine does not power on at all, when the 220V breaker is turned on. Is there a fuse or any other internal

Hi Scott; Thanks for the information. We have a system of supporting the tender and the outboard on the Davits that has also has been proven. Our only concern, at this point, is the fit on the aft sun

#dinghy

HI Teun; Hope you’re doing well. Thanks for the input and I’m in complete agreement with the geometry being correct. Our dealer will make custom installation of the pickup points to match the Davits.

Hi Dirk; Thanks for sharing your experience. We are getting ready to make our final selection of our new tender. We intend to carry the tender on the aft sundeck and was wondering if the tender interf

#dinghy

I recently finished reading the book 66 days Adrift, where a boat was "attacked" by a large pod of pilot whales 1000 miles into the passage between panama and Hawaii and the boat was lost due to water

HI Scott; Thanks for the info. I have ordered 4 of them which gets you free shipping for orders over $100. The link you sent for the Volvo part lists the part (item #19) as 175 Euros. Still a big diff

Hi Eric; We’re having the same insurance issues for the Med. I contacted Netherlands Insurance today and received a quick response with application forms to fill, which I have sent back. Here’s the li

Hi Paul; We have had our 54 for about 6 years. We have not had any issues, other than the normal maintenance related items, with our 110, so far. We had the same concerns at the time of purchase, as y

Hi; Our Amel is currently wintered in Montenegro. We are not on board and will not be there for at least another month or two. We did have to hire a surveyor due to insurance requirements last year, e

#solution

Hi Stefan; This is used for connecting a water hose to the water intake to flush an outboard engine for the tender. Happy Sailing; Mohammad and Aty B&B Kokomo AMEL 54 #099

Hi Ann-Sofie; That’s great, thank you. Happy Sailing; Mohammad and Aty B&B Kokomo AMEL 54 #099

Hello Halsinger; Nice looking hard top. Do you have more pictures and/or videos that show more detail? Where did you have this top fabricated? Happy Sailing; Mohammad and Aty B&B Kokomo AMEL 54 #099

Thank Bill for all your efforts. Happy Sailing; Mohammad and Aty B&B Kokomo AMEL 54 #099