Kent Can,t see any problem I assume all SM are identical with respect to hatches Installation should be rather straight forward We are very happy with the SS job they have done Paul SM 259

Kent! Don't see any problem assume the size of the hatches are the same, The Stainless steel work by Emek is of good quality, and mounting is not very difficult unless you have problem to drill a hole

Hello! We have a new Victron combined charger inverter 70A/3000w, rather new to us, but so fare we are happy with it, we kept our old Dolphine charger, so we can run either or both at the same time, I

I post some pictures of the Bimini/Winter cover we made after seeing Elauthera. It was excellent this winter, the side panels can be replaced by mesh panels that are see through but give excellent sha

Hello! Eric following up on this old thread When using IridiumGo and Predict wind, how long does it take to download a weather report when crossing an ocean? as the 125$/month in the long run will be

Thankyou just what I want to know about Igo and Predict Wind Paul SY KERPA SM 259

I haveproblem with my Alternator, it stopped charging and I found a cable that wherelose Thealternator is of Brand Valdo (60A/28v) a Turkish made one, do not know if it’san original one. Allcable is f

Hello! We have a VP TMD 22P, and I'm now in the process of buying spare parts, the prices varies a lot dependent on where one buy them and absolut most expensive is VP them self. As the TMD 22 is an "

We also have a Rocna, and very happy with the holding and setting, but we have one problem, when retrieving it, it often come up the wrong way on the bow roller. I have heard from some that to add a f

JPPlease send, will be on Corsica mid July, Balearic late July early August, will leave Lagos around the 5 September for Lanzarote Paul on S/Y Kerpa SM#259

Bill, Ian and Kent Thank you I will try with a chakel. This is the first boat I have that come with swivel. I have never missed one on my previous boats Paul on SYKerpa SM 259

When sailing closed hauled with the sail partly furled there is a substantial load on the furlers and they need must be locked some way, else the sail would unfurl An electric motor has very little "f

I have an experience similar as JP. I have also meet another Amel owner with similar experience. I,M happy to share my experience If anyone is interested then email me at sykerpa at gmail dot com Paul

We havehad some upwind sailing in the Med with apparent wind up to 35 knots. Unfortunatelyour outhaul rope is creeping so the car holding the sail is sliding forward andthe sail taking the shape of a

Thank you all, will start with the contact cement looks as a cost efficient solution. I have tension the line a few times now, so when no tension from sail I can almost play a tune on it, but when clo

You are probably right about the dimensions, we now have a 12 mm Marlow Dynnema. And today we sailed upwind in 22 knot wind with no problems but I had to tension the line Paul SM 259

Thanks Today they have ropes where there are soposed to be no sliding between the core and the cover but they cone at a premium Paul SYKERPA SM 259

Hello Something wrong with our I think original pressure switch. It does work occasionally when not working. A light tap will make the pump start. Anyone have any idea how to fix? It looks as if the s

Thank you all I sure I can sort it out now Paul on S/Y Kerpa SM#259

We have also experience the siphoned effect, next time the level is down we will install a close off valve on the return line It got rather messy last time we. Had to prime The Onan Paul on SYKerpa SM