|
[Amel Yacht Owners] Main sheet boom slider broken
I will take a few photos and some measurements and email them to you, but Houston did it all on his own. I just asked if it might be possible to combine them all and then picked up the boom a week lat
I will take a few photos and some measurements and email them to you, but Houston did it all on his own. I just asked if it might be possible to combine them all and then picked up the boom a week lat
|
By
...
· #39513
·
|
|
[Amel Yacht Owners] Main sheet boom slider broken
I didn’t knowingly do anything smart. I’m on my phone as was the photo, and while I was typing my response to you I just dropped down a couple lines (hit return) and then held my thumb on the cursor u
I didn’t knowingly do anything smart. I’m on my phone as was the photo, and while I was typing my response to you I just dropped down a couple lines (hit return) and then held my thumb on the cursor u
|
By
...
· #39502
·
|
|
[Amel Yacht Owners] Main sheet boom slider broken
Hi Kent, I had the same crack when I bought TouRai and had it separate from the boom entirely on my first move from Lauderdale to Brunswick, GA. I had Houston from Nance and Underwood in Lauderdale ma
Hi Kent, I had the same crack when I bought TouRai and had it separate from the boom entirely on my first move from Lauderdale to Brunswick, GA. I had Houston from Nance and Underwood in Lauderdale ma
|
By
...
· #39496
·
|
|
[Amel Yacht Owners] Re: Water coming through below rudder quadrant
Thanks all for the replies. I found that the previous owner left me a slip nut tool and wouldn’t you know it, it was tightened to exactly the width I needed for the packing but. I was only able to get
Thanks all for the replies. I found that the previous owner left me a slip nut tool and wouldn’t you know it, it was tightened to exactly the width I needed for the packing but. I was only able to get
|
By
...
· #39178
·
|
|
Water coming through below rudder quadrant
Hello all. After avoiding the Berries all season because it just seemed too shallow with limited protection, I made a pass through it 2 days ago, and promptly found myself aground trying to turn aroun
Hello all. After avoiding the Berries all season because it just seemed too shallow with limited protection, I made a pass through it 2 days ago, and promptly found myself aground trying to turn aroun
|
By
...
· #39165
·
|
|
[Amel Yacht Owners] Autohelm housing
We removed ours this fall and placed the Navpod over its existing cutout. Ours seemed to be held in place by something similar to 3m 4200. After removing r The screws, I took a single edged razor blad
We removed ours this fall and placed the Navpod over its existing cutout. Ours seemed to be held in place by something similar to 3m 4200. After removing r The screws, I took a single edged razor blad
|
By
...
· #38803
·
|
|
[Amel Yacht Owners] where do you store your tools?
I keep two “quick grab” boxes on the shelf in the pass through. I keep an assortment of frequently used basics in the chart drawer. And the bulk of everything else goes in a large Rigid brand box in t
I keep two “quick grab” boxes on the shelf in the pass through. I keep an assortment of frequently used basics in the chart drawer. And the bulk of everything else goes in a large Rigid brand box in t
|
By
...
· #38727
·
|
|
[Amel Yacht Owners] Re: Maretron Electronics experience?
We put our new Garmin 7612 in a Navpod at the helm and are happy with it. I wish it had a lower stance and I wish I could adjust the angle of the screen, but I love how protected it is, how much harde
We put our new Garmin 7612 in a Navpod at the helm and are happy with it. I wish it had a lower stance and I wish I could adjust the angle of the screen, but I love how protected it is, how much harde
|
By
...
· #38240
·
|
|
[Amel Yacht Owners] Pole height at shroud?
On Feb 19, 2018, at 6:05 PM, Stephen Morrison steve_morrison@... [amelyachtowners] <amelyachtowners@...> wrote: Hello all. I recently had Nance and Underwood install new standing riggi
On Feb 19, 2018, at 6:05 PM, Stephen Morrison steve_morrison@... [amelyachtowners] <amelyachtowners@...> wrote: Hello all. I recently had Nance and Underwood install new standing riggi
|
By
...
· #38165
·
|
|
Pole height at shroud?
Hello all. I recently had Nance and Underwood install new standing rigging here in Florida and noticed that the height of the pole support on the shrouds varied noticeably. I was also on another Amel
Hello all. I recently had Nance and Underwood install new standing rigging here in Florida and noticed that the height of the pole support on the shrouds varied noticeably. I was also on another Amel
|
By
...
· #38164
·
|
|
[Amel Yacht Owners] Generator charging question
Thank you Mohammad. I am hoping to hear something much as you recall, an explanation as to why this should be avoided, or why, under certain circumstances perhaps, it might be fine. It would obviously
Thank you Mohammad. I am hoping to hear something much as you recall, an explanation as to why this should be avoided, or why, under certain circumstances perhaps, it might be fine. It would obviously
|
By
...
· #37580
·
|
|
Generator charging question
If I am running the generator just to charge the batteries, meaning I have no other load on the generator, is there a downside to engaging both the 100 amp and the 30 amp dolphin chargers? As an examp
If I am running the generator just to charge the batteries, meaning I have no other load on the generator, is there a downside to engaging both the 100 amp and the 30 amp dolphin chargers? As an examp
|
By
...
· #37576
·
|
|
[Amel Yacht Owners] Re: Inverter/Charger wiring advise
As a Bimini option I would throw out Bimini Sands on South Bimini. It was simple to get in and out, has nice floating docks, doesn’t have a tide running through it, and has a resident cluster of Bull
As a Bimini option I would throw out Bimini Sands on South Bimini. It was simple to get in and out, has nice floating docks, doesn’t have a tide running through it, and has a resident cluster of Bull
|
By
...
· #37575
·
|
|
[Amel Yacht Owners] Re: Solar Panel Location
I just this morning removed one of Emek’s stainless arches we had made. He made it up and sent it in the spring but it has been nothing but issues. The fit was horrendous and though he made gestures t
I just this morning removed one of Emek’s stainless arches we had made. He made it up and sent it in the spring but it has been nothing but issues. The fit was horrendous and though he made gestures t
|
By
...
· #36787
·
|
|
[Amel Yacht Owners] Re: Deltaville
Bill, Kent, and anyone else heading south. We (my wife and two daughters 8&10) are in Brunswick now but leave for t. Lauderdale next week and will be hauling out at LMC for bottom paint and a few othe
Bill, Kent, and anyone else heading south. We (my wife and two daughters 8&10) are in Brunswick now but leave for t. Lauderdale next week and will be hauling out at LMC for bottom paint and a few othe
|
By
...
· #36152
·
|
|
[Amel Yacht Owners] Re: Wet / vacuum for bilge cleaning [1 Attachment]
https://www.amazon.com/Dewalt-DCV580H-Cordless-Wet-Dry-Vacuum/dp/B00CP8DF3O/ref=sr_1_5_m?s=home-garden&ie=UTF8&qid=1509217415&sr=1-5&keywords=dewalt+shop+vac I use this as I also use the batteries wit
https://www.amazon.com/Dewalt-DCV580H-Cordless-Wet-Dry-Vacuum/dp/B00CP8DF3O/ref=sr_1_5_m?s=home-garden&ie=UTF8&qid=1509217415&sr=1-5&keywords=dewalt+shop+vac I use this as I also use the batteries wit
|
By
...
· #36121
·
|
|
[Amel Yacht Owners] Fw: Mizzen gooseneck [3 Attachments]
Not sure if these are original or not, but this is how 380 looks today All the best, Steve Morrison SM 380 TouRai Brunswick, Ga
Not sure if these are original or not, but this is how 380 looks today All the best, Steve Morrison SM 380 TouRai Brunswick, Ga
|
By
...
· #35858
·
|
|
[Amel Yacht Owners] Life Raft
In terms of getting rid of an old life raft, we found a local dive center that works with training airline crews and were able to use their pool facility to launch our old Zodiac and run through a num
In terms of getting rid of an old life raft, we found a local dive center that works with training airline crews and were able to use their pool facility to launch our old Zodiac and run through a num
|
By
...
· #35561
·
|
|
[Amel Yacht Owners] Recommendations on life raft
We have also recently replaced our original Zodiac life raft with the Winslow 6-person SLOP version and store it right beside the helm station in the cockpit locker. It sits atop a plastic tote with e
We have also recently replaced our original Zodiac life raft with the Winslow 6-person SLOP version and store it right beside the helm station in the cockpit locker. It sits atop a plastic tote with e
|
By
...
· #35547
·
|
|
[Amel Yacht Owners] Amfa domestic watrer pump.wired backwards from the factory.
I would love to purchase it Alex. I hope that you are finding the situation in St Maarten to be improving. Steve Morrison SM 380 TouRai
I would love to purchase it Alex. I hope that you are finding the situation in St Maarten to be improving. Steve Morrison SM 380 TouRai
|
By
...
· #35368
·
|