That’s interesting Bill, I too am not a smart sailor but want to be and learn every step of the way I hope. I will look into the black box as I am appreciating more that all elements need to be calcul

Thanks Joerg I have found the issue, the SOG was not activated in the H3000 set up. All is ok now, but it will improve more once I calabrate all parameters Thanks Paul

I have purchased an ST60 online through eBay last year at a low cost as works fine, good luck

hello all, I am inquiring for some advice on purchasing a symmetrical spinniker or parasail to sail directly down wind by using the Genoa pole. does owners have experience with a suitable unit for thi

Thanks Porter, I appreciate your information and response, food for thought. Regards Paul

Hi Joerg Thanks for the information. So you use your parasailor without the pole, do you find it easy to launch and retrieve without issues and what wind do from good from and up to? Obviously it perf

Hi, As comment, I am not so technically minded and have always been under knowledgeable when it comes to boat batterie systems and the carful management required in my 15 years of ownership with power

Scott, No I don’t run any appliances that require the genset usually until the batteries require charging then I make water etc, of course if I require the aircon I need to run the genset Regards Paul

Scott, unfortunately my aircon and washing machine and water maker does not work of my inverter otherwise I’d love to, maybe I can upgrade my inverter and wire them in to the 720ah lithium 24v system

Hey Scott, thank you and I was figuring a 5000w inverter upgrade (Maybe a 7500w when available)to run all from 24v when possible, I too have a Bauer junior. I guess then genset is still a great reliab

Hi Scott I do like your thinking and see you have muchbmore understanding than I. I generally run my 720ah lithium MV down to around 30% before I top them up with the generator and usually only to abo

Hi Bill, if possible on another note, can you please advise me on when to use the moving back stays associated to the stay sail? Is it only in strong winds and regardless of if using the Genoa at the

Have you tried entering into Menu and then setup and then calibrate and the entering a source? I’d had the same issue I think and found a source was not assigned such as SOG or similar Regards Paul- F

Hi Bill, my issue was similar except my paddle wheel and sensor was ok accept the parameter associated to the sow was not activated in the H300 display, this then gave me SOW and correct TW and AW Reg

Hi Joerg What is the general amps produced in various winds? Regards Paul 55#17

Bill, it worked fine all last season but when i commenced sailing this season the paddle wheel was not functioning due to barnacles so I replaced it and it stated STW off, then you pointed me to calib

Sorry Oliver I am not sure but you should be able to down load from the internet, I have the FURUNO H3000 and found it on the internet... It is fairly simple if you get to the calibration page under s

Thank you again Bill for the kind assistance, this document helps and I will check and calibrate according, you are most kind Regards Paul

Oliver, I suggest you try the calibration and parameters prior to any replacements or cleaning as my problem was similar to your issue Paul

Sounds very effective, could I ask the total cost? Regards Paul