Thx Brent and Steve. I watched the videos and will meet Steve in Hawaii :-) herbert

Hi all, on our way from Panama to Alaska (starting beginning of 2019) we want to stop for ~ 2-3 months in Hawaii (March- May). Has anyone some recommendations where to stay with the boat? Is it necess

Hi Olivier, thx for the pictures, this was exactly what I was looking for. I will do it in a similar way. you are always such a great help! herbert SN120 KALI MERA

thanks Alan! that seems to be a strong Aluminium extension to the Mast-Head, professional solution. Cannot do that now, but maybe a stainless steel plate, screwed on the masthead, with rubber between

when we purchased KALI MERA in 2013 shewas equipped with a Parasailor instead of the Amel balooner. An additional block was mounted on the top of the mast and the halyard for the balooner was fed up t

we would take 5 in Aluminium or ABS, whatever the rest takes. thx, Herbert Tadeja and Herbert KALI MERA SN120 Panama, Shelter Bay

Hi Bill, I think I could not express myself very clear, try to say it again, sorry for my English: when the rudder is moved by the rotary drive (or by the steering wheel) it moves very smooth, you can

maybe a stupid question from a SN owner: when adding a linear drive -- the rotary steering system stays exactly the same, no changes, is that right? No need to disconnect the cables when switching to

Hi Paul, we changed all electronics to raymarine 4 years ago. I removed the ground after having strange behaviour of the system, is running fine now since 4 years without ground. Was in contact with r

thx John and Bill, I checked now the Antal product range, 801.060 might fit. As I am not on the boat and want to organize everything before returning to the boat and going to the pacific, maybe there

hi all, the pulleys on KALI MERAs genua travellers are end of life, genua sheet is sliding in the roller / pulley and pulley is not turning anymore. Does anyone know a source for a replacement? Size (

John, this is a common problem to this engine and occurs if the water pump flange is mounted without beeing aligned (not centered). It has to be aligned with a special tool available from Volvo. If th

Pat, we have good experience with Shelter Bay Marina in Panama. nice and safe herbert SN120, Kali Mera, Shelter Bay

Craig, we have an Fischer Panda 4000i with a 1 cylinder kubota engine, 4kw. Initial it had fixed RPM ~2900 but two years ago I upgraded it with a variable speed option (step motor that pushes the thro

Hi Ian, your sail is Dacron, we ordered the same as you, have been very satisfied up to now. herbert, KALI MERA, SN120, on the hard in Shelter Bay Panama

Thx JP, will visit you on your boat to check that :-) Herbert, Dock D

Many of the screws that hold the stainless frame of the side windows are loose on our Santorin and some are not holding good enough to allow tightening. It looks as they are just screwed through to wo

Hi Ian, we do not have a seperate cooler, still the original configuration. I do not know if that makes the setup better in the SN. Last year the Hurth housing startet to leak a little bit, only some

my Hurth repair manual explicitely says ATF Type A, so I tried to find out what would be the best to replace Type A (I will run out of stock soon). I made some research and found out that this topic i

hi gang, now as the discussion is about ATF - I was wondering if it has to be ATF Type A as required by Hurth. As Type A is not very common anymore is it ok to use any ATF Dexron 2 or 3 (what is avail