Steve & Liz We have the 40KG Rocna anchor and it fits perfectly. We have had it for 6 years and is our go to anchor. Paul & Sue SV NOMAD SM #362 Currently in Bermuda To: amelyachtowners@...

We did it the same way as Patrick, Roll and tip with a brush. Paul To: amelyachtowners@... From: sailw32@... Date: Sat, 8 Mar 2014 07:15:15 -0500 Subject: Re: [Amel Yacht Owners] Mast

Terry & Dena We recently repainted our masts with Awlgrip, Eggshell in colour. This was almost a perfect match. You could tell where we dd touch ups as it is so shiny when compared to the old paint wh

Hi Kent & Ann-Sophie We have this table and just love it. It is compact and stows away in a nice neat package. We mount it on the locker side on the permanent mounting bracket that takes up so little

Pat & Dave Similiar to Bill we ditched our Globalstar. We use the Iridium. Text messages are free. We buy 500 minutes per year at 1.50 per minute. These can be rolled over if a further 500 minutes is

Francisco We replaced our safe and have the old key. Don't know if it will work. Paul & Sue LaFrance SV NOMAD #362 SM Currently in THE BVI To: amelyachtowners@... From: no_reply@yahoogroup

Pat We have a used autoprop from our Amel for sale that was refurbished one year ago. We had to go to a different size due to an engine change and Yanmar would not warranty same without the change. We

Alan We asked Dolphin about the desulphation mode on their charges and the reply came back from France saying not to use it. We questioned why they have it and no response was ever received. Paul & Su

Ian We tried to get to the bolts on the forward head by cutting a piece of the front plate out. The size was the width of my hand. When I tried reaching in there was a large block of wood in the way a

Hello All I contacted the broker and the vessel is in Fort Lauderdale Paul LaFrance SV NOMAD #362 To: amelyachtowners@... From: bobh@... Date: Wed, 25 Sep 2013 13:09:58 +0

We currently have our masts off. We noted there are 4 feeder lines to take the halyards etc up inside the mast. 2 of the feeder lines we have determined are for halyards and we can pull them back and

We are re-powering our Super Maramu and are required to replace our current prop to get the Yanmar Factory warranty. As such we have our current prop for sale. It is an Autoprop H6-566LH. The prop wil

Miles We are having the same discussion with Yanmar about the RPM. We are repowering from the Yanmar 75 to the 100HP. This engine has a rev point of 3200 vs 3800 on the 75HP. Autoprop in Nerwport have

Kent Could you call me at 941-323-7838 to discuss your repowering Paul LaFrance SV NOMAD SM #362 To: amelyachtowners@... From: karkauai@... Date: Mon, 22 Jul 2013 05:53:27 -0700 Subj

Tom We have been travelling back and forth EastCoast/Carib for the past 10 years. We make it a practice to always secure our dingy whenever we are ashore. We use a Motorcycle cable Krypto?? with a sim

Kent The Magma charger works independent of the Dolphin charger when hooked up to shore power. The Dolphin 30 Amp charger takes 110/60 and puts it into 220/50 to the 24 V batteries. I run the inverter

Kent You are quite correct that my calculations are off. We have a total of 720 Amp Hrs in 12 lead acid batteries. Paul LaFrance To: amelyachtowners@... From: karkauai@... Date: Sun,

Kent The Magma charger is working great. Been in for 2.5 YRS. The only problem is when inverting is it drains the batteries quickly. ie: can only run the water maker for 1/2 hr before it shuts off due

Does anyone know the rigging tension required for the SM model. Paul & Sue LaFrance SV NOMAD SM #362 Currently in St Marteen

Good Day All We are looking at installing an Inner Fore-stay on Nomad. It would be a Solent type of rig with a self tacking jib forward of the mast. No need for running back-stays. Head goes to top of