Hello Maria, We can share some of iur experiences. We stayed in Didim, Leros and Aghios Nikolos. All of them are fine marinas. Crete has the best climate for the winter and is a lovely island. The mar

Dear all, Thanks for the information, comments and suggestions. I'll be working on this issue the first week of May and will try to document the process. Best regards, Rink SM2K #330 razor's Edge

Hi Trevor, Thanks for your reply. I'll check the info. I am also looking for some hands on experience to share. I put some photo's of the bimini in the Razor's Edge photo folder. Just in case you want

I want to replace my rubber gas pipes from the bottles to the copper pipe and from the ENO stove to the copper pipe. As there are compression fittings being used I assume there will be an old compress

Hi all. The response I got from Amel about my question to send me the tool was "The tool you are talking about is not available any more, I'm sorry." So I guess it is no longer available. Rink Op 6 mr

Last week I requested the tool from Amel but it is no longer available. Rink de Haan SM #330 Razor's Edge Kusasi Turkey Op 6 mrt. 2013 om 18:16 heeft "jdernehl@..." <jdernehl@...> het volg

We had the same some years ago. I left the boat for a couple of months without any water in the waste water tanks. I guess that'll erode the ball in the valve. I also had to use some force, but after

I have tried several techniques in the past. This autumn I bought a product called "6-mile Wifi Unit". This worked perfect on my Windows 7 laptop computer. You can check out product details at this li

Hi Bill, We are located in Kusadasi Turkey and have no experience with these sail lofts. But in Kusadasi we bought sails from the Ullman Sails representative (UK Brand, Dutch Contender brand sail clot

To be more precise it is the CM-20 with article number 08.811.203 (at least at their catalogue).

Hi Mark, The calpeda pump on our SM2000 #330 is the CM-20 Centrifugal Pump Model BMP-35. I bought my in Holland at www.barcomarine.nl It was about €500. But they could rebuild it for €250. Hope this i

Hi Bill, Got mine chain this year in Kusadasi, Turkey. Satisfied with the quality. Be aware that the chain they sell in Turkey is 10 mm ISO. Our gypsy on the Lofrans is 10mm but an 3/8 size. So In I h

Bill, Maybe not of any help, but I had a loss of power of my windlass a couple of years ago. It turned out to be a broken connection on my alternator which caused insufficient charging of the batterie

Yes, I had the same problem with our holding tank pipes too last year. I managed to free them with a combination of using an acid (guess it was an organic stuff) and a cable they use for pulling wire

If you can't wait to read the article, buy a digital copy at the Apple store or on Zinio.com for apple or windows. It's available from today. The article is a praise for Amel and makes you proud to be

I use Navionics charts on my plotter and PC. Works very well. When We bought our SM2000 there was a Raymarine plotter with C-map charts. This doesn't work very well, mostly because of the limitations

If it is a Climma you can find US dealers on http://www.veco.net/veco/sito/service2.asp?pag=3&tipo=a I bought mine in the Netherlands at Barco Marine. Cheers, Rink Razor's Edge SM330 Verstuurd vanaf m

Hello George, Are you sure that the compressors are shot? Could also be a blown capacitor inside the electrical box of the airco. It's easy to see when they are blown. Changing is easy and will cost y

Hello John, I did the same last year though I replaced the pump with a new Calpeda. The old one was serviced in Holland, were we live, by the Dutch distributor and service point. There contact informa

Hello everyone, We are planning to relocate our SM2000 from Crete to the Kusadasi Marina in Turkey. We would also like to do some maintenance there. Does anyone have experiences (good or bad) with thi