Any Help Will be appreciated! Our bilge pump was running for what seemed a long time. So I went down to see what was up. I found the motor running, but not pumping. The motor drive a plastic gear that

Hi Bill, I did order the Genoa with a foam luff, and I am lead to believe my sails should be identical to those on BeBe. If you were happy with the sails from Qsails on BeBe, I should be very happy wi

Thanks Paul and James, Still looking forward to receiving the new Qsails in two days, but no doubt a bit worried in light of your posts. My hope was to get STOCK AMEL SIZED and CUT SAILS, no changes.

Paul, What was the material material used for your sails? Aquarius will be fitted with Hydranet sails, and I hope (because Hydranet is not cheap) that they will be good for many years.... Thanks for y

Hi, Bill told me about QSails, and I am to receive the sails today from QSails. They have all the measurements. I have not seen the sails yet, just a photo. But, the service so far has been awesome! Q

Hello Ryan, I have the same problem with two of my Climma conditioners. The problem with the unit in the living room was a $15 relay (repair to be completed soon), but the problem with the aft cabin r

Hello all, Aquarius has been updated to look more like BeBe on the inside, and we have replaced our lightly used interior cushion set. This includes the cushions around the table and the love seat. Pi

Hello Pat, According to Volvo Penta you need to replace the exhaust manifold about every 2000 hours or so. If you don't replace it, the airflow starts to restrict. The part cost about $600, and takes

To All, My thoughts and prayers go out to all the people that were in the path of Irma. Is there anyone close to Alex that could pick him up and take him somewhere safe.... maybe Martinique.... I hope

Hello All, I was hoping that someone could tell me the length of the two high pressure hoses. I have a SM2K built in 1999 and have the standard Dessalator water maker. Do they all have the 3/8 inch JI

Hello Eric, Gaetan Rivet Caraibe did my standing rigging 5 months ago. Looks good, and was a bit more than 10K euros for the entire job. The only thing I could complain about is that they put the geno

Lots of people tell you that these will work on the Amel 24 volt system. But, I blew out many LED lights trying to change over. Trust me, buy two of these lamps and put them in series. You will be muc

Hello Ryan, I also had a problem with the overhead lights with the two parallel inserts to make connection. I did find some that "worked" but the only worked for about 10 minutes and blew out. Also, t

Hi, Measure the voltage at the motor when the motor should be running. I think you did this and the measurement was 24 V. Could be the wire, a loose or bad connection, the solenoid, or the motor. Look

Hello all, Any information is appreciated. I am in the process of purchasing a new Genoa for Aquarius, SM#262, and now found that I don't have all the information required to choose the proper sail. I

Just because you get 12.6 volts at a point, does not mean everything is OK. If your terminals are dirty, you can get 12.6 volts no problem, but when you try to get some current through those dirty ter

Hello Jean-Pierre, Hope you are well, and looking forward to meet up again sometime soon. Aquarius is currently on the hard in Trinidad, and we will be going to Panama November. Probably going to sail

Thanks, Ken

Hello All, I am looking to buy a spare 24V motor for the main furling system, and can not seem to find the Leroy Somer brand available anymore. I called the Leroy Somer US representative, and they did

I am an electrical engineer, but of course .... sometimes the advice is worth exactly what you pay for it.... The person the wrote that the wrote that the current will be less if operating at 220V rat