i am not in this situation (yet) but still curious. Has anyone ever taken their fuel level down to the beginning of the red area on the gauge and measured actual amount in the tank using the dipstick?

The bottom part goes between the shaft nut and your prop (if it’s a fixed blade, not sure about folding). At least that’s where mine has always been. Ian & Margaret Local Lola II SM153

You're pretty close with that figure Steve. Yes, it's a big job but not overly complicated. If I can do it, believe me, anyone can. Good luck! Feel free to PM me with any questions. Ian & Margaret S/V

Bill, it's totally fine with me to share the file I created for the AC install we did in 2017 on Loca Lola II. Everything continues to run well. We are very happy with the equipment choices we made. I

Great solution. Thx! Ian & Margaret S/V Loca Lola II SM153 Bahamas

We stayed at IWW in the Lagoon in 2015. At that time, we were satisfied with facility and generally with the service. Ian & Margaret S/V Loca Lola II SM153 Bahamas

Hi Kelly. Sorry we missed you guys in the Boston area this summer. Not quite sure what is meant by other AMEL-adjacent pursuits. I have seen several forum members who are quite active, who provide muc

Sent from my Samsung Galaxy smartphone.

We also Navionics via subscription service. Ian & Margaret S/V Loca Lola II SM153 US East Coast

We installed a Webasto 10,000 BTU unit. Note that most other manufacturers do not outwardly state their units are dual cycle (so they don't have to replace parts under warranty). Webasto does. They al

#replacement

Make sure that Incidences cuts your mainsail to the proper size. The previous owner commissioned from Incidences and the "P" dimension (luff) was 45 cm too short. As a result the "E" (foot) was also i

Paper not removed. We used contact cement. We did not remove the door. We spent lots of time making sure of the fit so that it could be cut right to the trim on the top and the sides. We were extremel

We used this veneer, ordered through Amazon. https://www.amazon.com/gp/product/B06XCTWSX3/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 Ian & Margaret S/V Loca Lola II SM153 US East Coast

On SM153, we want to remove the plastic part that holds the table to the helm seat. See attached picture. Has anyone ever done this? It looks like it might be epoxied but thought I would ask before I

Hi Gary. That's the crazy part. The turbo was OEM! Ian & Margaret S/V Loca Lola II SM153 US East Coast

The turbocharger on our Volvo TMD22 needed replacing in a hurry. After consulting with Bill Rouse and online searcing for a source in the USA, we found an OEM Perkins-Garrett replacement for $850 USD

VF44 P1 60 P63B14 B3 SPEED REDUCER, 60;1 RATIO, 63 FRAME, B14 FLANGE , CODE: 200480249 Ian & Margaret S/V Loca Lola II SM153 US East Coast

I just took delivery for our Bonfiglioli unit. Lead time was several weeks. MITCH SILVERMAN DRIVETECH AUTOMATION, INC. 5401 NW 102ND AVE. #146 SUNRISE, FL. 33351 TEL: 954-746-9800 FAX: 954-746-5509 WE

We used Brightside Hatteras Off White and a flattening agent. Very close match. Ian & Margaret S/V Loca Lola II SM153 US East Coast

Mark, can we talk via PM? I'm interested in your experience with the Schengen rules. Ian & Margaret S/V Loca Lola II SM153 US East Coast