Paul, You should speak to Mark McGovern (CC'd). As you know when Amel stopped supplying the PCB for the bow thruster Mark made some for Amel owners. Mark is intimately familiar with the PCB operation.

I have what you need. Bow Thruster SM SN Sensor Location & Adjustment... CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... Address: 720 Winnie, Galveston Island, Texas 77550 We

Jose, I am not 100% sure, but if your SM has not been changed since she was new, the water heater is protected by the rudder zincs with a bonding wire attachment. If that bonding wire is in place, I d

#solution

Michael & Robyn, This issue you are having with line slipping in the AndersonLine Handler sheave is simple to explain and rather easy to fix. When your SM was new the line in both of these was the sam

Bill I have not seen a photo of this installation, but I have reviewed photos of about 6 repowered Amels in the past 12 months and none made this mistake. However, 3 out of 6 had been repowered with t

Mike, you and Tom will be missed but never forgotten! Thanks for your superb participation in this Group and thanks for all of the things you have shared. I am sure that many Amel owners who have bene

Great! I did this about 8 years ago and could not remember the circlip. Thanks for the photos. Bill CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... Address: 720 Winnie, Galve

Jamie, I agree completely. The SM is great, the 54 better, and if Amel had used Reckmann, maybe the 54 would be best. Best, CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 72

Joel, You need to discuss it with the company that I pay a royalty for using it. The company and contact that I paid is Alamy Limited Alamy is a British privately owned stock photography agency launch

I agree it is great! You'll find a copy here: https://preparetocastoff.blogspot.com/p/blog-page_2.html Best, CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... 720 Winnie, Galve

I see nobody has answered. You should write Maud and ask. I will write someone who I think knows the answer. Bill CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... Address: 720

The basic design is the same with respect to gray water. All gray water gravity-drains to a central single tank and is then pumped overboard. The location of the Amel 50 gray water tank changed becaus

The Amel 50, 60, 55, 54, SM & others have a gray water tank that is filled by gravity-drained gray water. The tank has an automatic pump which pumps gray water overboard. Sooner or later you will sell

Ian, I know this 54. You have a big job ahead of you. The original 12v alternator would have been attached to the engine by Volvo, and the isolation ground wired by Volvo France. But since there was n

Bill, Not to be picky, but isn't that elbow less than 90 degrees? CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... Address: 720 Winnie, Galveston Island, Texas 77550 Website:

Wow, that is a clean install. Thanks for that. I bet the white straps show stains! Bill CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@... Address: 720 Winnie, Galveston Island,

Marty, Thanks for posting. Can you give a description for each of these 3 photos? I randomly assigned numbers to them 1-3 below. CW Bill Rouse Amel Owners Yacht School +1 832-380-4970 | brouse@...

How to wire the battery bank can certainly be debated and the "expert" Nigel Calder will tell you the Henri Amel method is wrong. Others will try to convince you of this also. But, I have been on the

Mickey, I do not know if you have seen it, but there is a very good explanation of what Henri accomplished in a timeline format on Amel's website. It is named "Our Story" and I have a pdf copy here, b

Alex, Are you sure it is stainless steel? If it were my Maramu, I would have larger "small-pole mounts to the mainmast" fabricated in a machine shop from Aluminum and consider welding the larger alumi