First of all , after long storage without usine the calpeda d’eau water puma ,it is mentionned that you mustang use à screw driver and move the axe on the bottom side of the poser motor . In fact ,the

Hello , on BELAVITA nº 238 , we’ve 3 sailors regulators which provide 24v and 12 v , to cut both 24 & 12 , two circuit break et in the locker

Hello dear Amelians , we are now close to arrive at Grenada ( Grenada Marine ) for the cyclonic season . After some years aboard we look to change of life , and put BELAVITA , Super Maramu 2000 n° 238

Under the first step , in a toolbox . One of my friends , have made a superb woodcraft work with two drowers . Easy and superb . Philippe SM 238

Hi ! SM owners , Belavita have been equipped with Effekta 120 Ah model in sept. 2010 and cruise along 7 years without any issues . Dead last year in Colombia , and difficult to find the same trademark

Hi Steve , we are the happy owner of BELAVITA , SM 2000 hull number n° 238 . We are in the Caribbean Sea , currently in Colombia , sailing North ( Caymans ) and we are looking to sell our boat by end

Hello Steve , we are the happy owner of BELAVITA , SM 2K hull number n° 238 , one of the very first millenium model with all specs of the Millenium model . We plan to sell our boat by end of this year

Hello , there are 2 for sale on internet site : www.leboncoin . One in Cogolin , close to St Tropez , Asked price 68 k€ One in Solenzara ( Corse ) , asked price 80 k€ Both can be negociate . Philippe

My exhaust pipe is 90mm or 3 1/2 inch so , we have the same . Ordered via eBay ,with availability and compatibility . Regards Philippe

Here is picture of mixing elbow ordered and receive Philippe SM 2k 238 BELAVITA

Just made that week, ordered at hdi marine , price round 200 usd , I choose a cast stainless steel better resistance to corrosion .

Considering state of copper stipe after use , it's allways in the deepest zone of the bilge . Grey waters are made of soap emulsion + grease , oil etc ...grey waters are always 8 to 10 pH , it explain

Hello, about bilge cleaning , we proceed simply as follow . Every 2 month : high pressure cleaning with some liquid soap , as water is clean . Every 6 month : outside , cleaning of all bilge parts . V

Hello all , I hard the same issue on both toilets , ont have been fully glass fiber reinforced , and for the second , I have made long search on internet and found the following supplier . http://www.

Hi, dear all . Following the link , you will find the right way finding out the right rubber profile , as Hutchinson was the original provider for rubber parts . http://www.hutchinson.com/fr/thermopla

Dear all, I own one of the very first SM2k , hull number 238 , built and registred late in october 1998 . Originaly named '' Ouled '' , owned by family Amel as usual , the boat was used as commercial

About Climma capacitors , we are in Colombia with a AC failure . Specialist that come , explore unit and test capacitors , nothing but after extraction of compessor oil ( 50 g in the cooling gaz circu