|
[Amel Yacht Owners] Frigoboat re-charging
The low pressure tap connects to the compressor case directly. Mine is located on the dome of the compressor. Mark Mueller A54 - 68, Brass Ring Ft. Lauderdale
The low pressure tap connects to the compressor case directly. Mine is located on the dome of the compressor. Mark Mueller A54 - 68, Brass Ring Ft. Lauderdale
|
By
Mark & Debbie Mueller
· #38873
·
|
|
[Amel Yacht Owners] Re: Dessalator pump not working
Hi Mohammad, I removed the two capacitors on the high-pressure pump andmeasured their capacitance. The first was18mfd and the second measured 25mfd. Iassumed they should have been 30mfd each. I replac
Hi Mohammad, I removed the two capacitors on the high-pressure pump andmeasured their capacitance. The first was18mfd and the second measured 25mfd. Iassumed they should have been 30mfd each. I replac
|
By
Mark & Debbie Mueller
· #38868
·
|
|
[Amel Yacht Owners] Re: Dessalator pump not working
Did you come up with the correct size capacitor for your watermaker? I have a 160 liter per hour version and the capicator is painted obstructing the name plate. Any information would be appreciated.
Did you come up with the correct size capacitor for your watermaker? I have a 160 liter per hour version and the capicator is painted obstructing the name plate. Any information would be appreciated.
|
By
Mark & Debbie Mueller
· #38849
·
|
|
[Amel Yacht Owners] Bow Thruster Motor Bearing SM
A couple of thoughts - always protect the motor windingsfrom heat and arc flash. 1) Use a bearing separator kit, it is a diamond shapedbeveled puller. This clamps on the smallspace between the inner r
A couple of thoughts - always protect the motor windingsfrom heat and arc flash. 1) Use a bearing separator kit, it is a diamond shapedbeveled puller. This clamps on the smallspace between the inner r
|
By
Mark & Debbie Mueller
· #38796
·
|
|
Thru-hull fitting for Depth
Check out the following link, it contains a bunch of info for Airmar products. I had similar questions. http://www.gemeco.com/st850.php Mark Mueller A54-68 Brass Ring Ft. Lauderdale, glued to the dock
Check out the following link, it contains a bunch of info for Airmar products. I had similar questions. http://www.gemeco.com/st850.php Mark Mueller A54-68 Brass Ring Ft. Lauderdale, glued to the dock
|
By
Mark & Debbie Mueller
· #38590
·
|
|
[Amel Yacht Owners] Clogged anchor wash pipe - Barnacle Buster
The SDS for Barnacle Buster identifies phosphoric acid as the primary ingredient at 85% at a concentration of 5% - 20%. I think the rationale for not being specific to try and protect trade secrets. A
The SDS for Barnacle Buster identifies phosphoric acid as the primary ingredient at 85% at a concentration of 5% - 20%. I think the rationale for not being specific to try and protect trade secrets. A
|
By
Mark & Debbie Mueller
· #38477
·
|
|
Bamar Upgrade Program
I talked with Paul at Bamar USA Friday. Paul forwarded the letter below, I told him Iwould send it out to all interested parties on the A O G. With the interest generated from the Amel OwnersGroup plu
I talked with Paul at Bamar USA Friday. Paul forwarded the letter below, I told him Iwould send it out to all interested parties on the A O G. With the interest generated from the Amel OwnersGroup plu
|
By
Mark & Debbie Mueller
· #38056
·
|
|
A54 Hull Gelcoat Color
Would anyone know the name & manufacturer if possible OR the gelcoat color code number for the 54?? Thanks in advance. Mark & Debbie A54 #68, S/V Brass RingFt. Lauderdale
Would anyone know the name & manufacturer if possible OR the gelcoat color code number for the 54?? Thanks in advance. Mark & Debbie A54 #68, S/V Brass RingFt. Lauderdale
|
By
Mark & Debbie Mueller
· #38051
·
|
|
New Group Member in Ft Lauderdale
Hello Kent, S/V Kristy, SM243 - It truly is a small world. We are around the corner from you, just south of South Lake, in the Suntex - Loggerhead Marina slip 119. Give us a call if you have time: fou
Hello Kent, S/V Kristy, SM243 - It truly is a small world. We are around the corner from you, just south of South Lake, in the Suntex - Loggerhead Marina slip 119. Give us a call if you have time: fou
|
By
Mark & Debbie Mueller
· #37756
·
|
|
[Amel Yacht Owners] Bamar Amel Upgrade & New Group Member
I talked with Paul today, I don't know if it the same program you referenced. He indicated that if he were able to order 5 units or more he would receive substantial savings from Bamar that he would p
I talked with Paul today, I don't know if it the same program you referenced. He indicated that if he were able to order 5 units or more he would receive substantial savings from Bamar that he would p
|
By
Mark & Debbie Mueller
· #37739
·
|
|
Bamar Amel Upgrade & New Group Member
My wife, Debbie, and I are recent purchasers of an A54 #68currently in Fort Lauderdale. We arepleased to be members of such a dedicated community of people that are willingto help each other. Hopefull
My wife, Debbie, and I are recent purchasers of an A54 #68currently in Fort Lauderdale. We arepleased to be members of such a dedicated community of people that are willingto help each other. Hopefull
|
By
Mark & Debbie Mueller
· #37736
·
|