If it can be of any help, attached are some photos I received from Maxime @Amel a few months ago showing their bimini and rear extension. The reference numbers he gave me where: Ref amel 3204 :Capote

Hi Alan, Here are a couple of pictures of ours, if it can help. The wheels were changed by me and are not original (couldn’t find them). Not on the boat at the moment, so cannot take dimensions. Guill

Brilliant! Thank you Bill. These zoom meetings are incredibly valuable! Guillaume Carpathia III - SM2K #293 Now in Athens

Many thanks for your help. I have just ordered a new pump and will service my current one to keep as spare/mobile unit ready for emergencies. Guillaume Carpathia III, SM2K #293 Now in Athens

Recently, as we have been using the manual bilge pump quite a lot due to a problem on the AMFA electric pump, I noticed a leak on that pump, and getting worse. Grey water coming from the ceiling of th

Having had an intermittently working chain counter for the past two years (it could not record properly the chain going down, but was OK on the chain going up), I share my two cents which worked in my

Fantastic initiative, Bill, well done to all those involved! I look forward to joining the next Zoom meeting! Kind regards, Guillaume s/v Carpathia III – SM2K #293

#ZOOM #IMPORTANT

Thanks Bill, I should have thought to go through the Photos treasure trove! Would be interested in schematics or materials used if anyone has any (and of course Eric). Guillaume s/v Carpathia III – SM

#galley

Dear Paul, this is something I have been thinking of doing... Would you have any schematics / pictures / list of items you could share? Many thanks, Guillaume Carpathia III - SM2K #293 Malta

#galley

Dear Thomas, This is great, thank you for posting! Could you also post pictures of the different stages if you have them ? This replacement is something I have to do one day, so the more info to prepa

Thanks José, Bob & Eric, now understand how it is done, and will get the “tool” fabricated after I take the measures later this month. Have also ordered some anti-seize... Kind regards, Guillaume s/v

Having read the different discussions on the placement of greasing holes on the three furler gearboxes, I would like to be absolutely sure before I start drilling... Are the attached locations the rig

Hi Paul, In addition to the Actisense device, you can also check the Simrad AT10 for two way communication 0183 - 2000, a little less expensive (at least in Europe). I just bought it (with an addition

Hi Bill, Many thanks to you, and all those involved with the new forum, for all the work this must have been. It looks great and I am sure the functionalities will be much better than Yahoo! All the b

Hi Mark, I would be interested in two pulleys too, if you still have a couple available! Shipping to France or US if easier. I will write to your email. Mine is carpathia3 at yahoo dot com. Many thank

Merry Christmas to all from Malta, and thanks Dimitri K for posting our photo from La Valette on the Facebook site!!! Cathy & Guillaume s/v Carpathia III SM2K #293

Thanks for all the advice, things are shaping up! (andcontrarily to Richard’s practice, I do intend to use radar + AIS + fully integratedwith chartplotter). Craig, my mistake on the NAIS500 which, as

Many thanks for your advice, Alan, Mark, Craig, AIan and Richard, veryhelpful. Mark and Ian: I am tempted by the redundancy of a secondantenna, but does the 5m difference in height make any noticeable

Dear Amelians, We became proud owners of SM hull #293 last summer... We received lots of help from Olivier Beauté and Bill Rouse, but there is still sooooo much to learn... This Forum is invaluable! O

Dear Amelians, My wife and I are currently looking to buy an Amel SuperMaramu 2000; we looked at a couple in France (where we live) but haven’t foundthe right one yet, and we are now extending the sea