Gerhart, The red lighting means a lack of rpm on the prop shaft; that the generator is not charging Aras Grinius SV Fiasco, Sharki #163

Kudos to the editors Sv fiasco

#organize

Not sure if this helps but I saw this on PANBO. https://www.panbo.com/gps-date-rollover-affects-older-gps-units/ Aras Grinius S/V Fiasco #163 Sharki

I had similar problems with my vhf that most of you had. I ended up replacing the antenna wire and antenna. Attenuation ceased and range increased to about 25 nm. Aras Grinius SV FIASCO SHARKI # 163

I'd love some of Fiasco. Aras

I've been having the same problem, however I use a YC-230 to combine voltage of 2 30 amp /120V to give give me 220V. What I originally thought was that my batt charger failed. It tuned out I had a cou

S/V Fiasco (Sharki) prefers warmer weather, ergo August date would be the first choice. Oct dates can also work. Aras

Eric, the time has come to replace my companionway door. The delam is too far gone and the bottom edge is all chewed up. I'm wondering if you could send me your notes on replacing the door. In fact an

Boy oh boy, I feel better that I'm not alone in these endeavors. For 6 months I tried to get my house charging circuit to work properly; 3 different alternators, 2 "experts" and no good results. final

Does anybody know what happened to the Maramu from AlaskaWings? Just curious. Aras S/V FIASCO Sharki #163

I think I just found it: o understand why the rig tension on an Amel is so very different than on other fiberglass boats, we must first consider and understand the structural differences that Amel boa

I just got my electric motors rebuilt. Riggers got the forestay back up. Now comes the question of tuning. I searched the site for Joel Potters Rig Tuning but did not find anything. From the other pos

No. Hard paint will not adhere to soft paint. When I did my bottom job last year, the manufacturer instructions specifically said to remove all the old paint. I spent about 3-4 weeks blasting and sand

Since Gary has placed alot of effort in to this project, and Yahoo's! intentions are unclear,; I for one, am In favor with the change over. Moreover, the organization should make is easier to find stu

Thank Joel, Appreciate the thought and guidance. Aras

Olivier, Yes you are right. I only have 2 grooves on my furler. This begets the next question fro downwind sailing. I presume then, one must use the spinnaker halyard for the second sail. One should a

Can anyone tell me why the jib forestay needs to be greased? I took my forestay down to rebuild the electric motor and now I'm ready to put it back up. Rigger and I curious why greasing the forestay i

Glad y'all made it across the pond safely. Once you bring the boat back to Texas, will you go again?....Kidding. Congrats to the both you for chronicling Amel's, your trip, and most of all being inspi

There is a company in Easton MD that rebuilds electric motors. I just had my 3 electric furlerer motors rebuilt there at a most reasonable cost. PASCO 8538 Ocean Gateway Easton, MD 21601 Ryan Gaultney

Thank you Gary. First blush; all looks well. I registered and it's nice that one can his / her profile. Clean simple and elegant; just like Henri would have done...