|
Insurance
Owners of SM#396, svPerigee, Australian registered, are interested in potential aspects of self-insurance within a group of AMEL owners. Currently insured with: Pantaenius Australia, expiry Oct’20; FO
Owners of SM#396, svPerigee, Australian registered, are interested in potential aspects of self-insurance within a group of AMEL owners. Currently insured with: Pantaenius Australia, expiry Oct’20; FO
|
By
David Vogel
· #52351
·
|
|
HP Sensor for Dessalator DUO 60
Greetings, Does anyone know of an off-brand but compatible replacement for the Dessalator OEM High-Pressure Sensor (OEM p/n either 102087 or 100027 – I am still ascertaining which is the one applicabl
Greetings, Does anyone know of an off-brand but compatible replacement for the Dessalator OEM High-Pressure Sensor (OEM p/n either 102087 or 100027 – I am still ascertaining which is the one applicabl
|
By
David Vogel
· #50755
·
|
|
Headsets
#solution
Greetings all, PERIGEE has used 2x Sena SPH10 for 3 years docking/anchoring and mast-work, all OK with the exception that the microphone occasionally disconnects, which CorrosionX sorts out. We have u
Greetings all, PERIGEE has used 2x Sena SPH10 for 3 years docking/anchoring and mast-work, all OK with the exception that the microphone occasionally disconnects, which CorrosionX sorts out. We have u
|
By
David Vogel
· #50747
·
|
|
Microwave - general comments
Greetings Stefano, When we ‘updated’ the unit on-board when we purchased, we replaced it with an LG brand microwave with fan-forced resistive heater, but the microwave part of it was not able to run o
Greetings Stefano, When we ‘updated’ the unit on-board when we purchased, we replaced it with an LG brand microwave with fan-forced resistive heater, but the microwave part of it was not able to run o
|
By
David Vogel
· #46106
·
|
|
Batteries: copper bars will not work - be sure that you have jumpers to wire the pairs in series
Thanks Bill, Dan, OK, Perigee has a copper bridging bar for each pair, running between the threaded studs of each battery in a pair. But point taken, there may be the need to use cables to bridge the
Thanks Bill, Dan, OK, Perigee has a copper bridging bar for each pair, running between the threaded studs of each battery in a pair. But point taken, there may be the need to use cables to bridge the
|
By
David Vogel
· #46031
·
|
|
Batteries: copper bars will not work - be sure that you have jumpers to wire the pairs in series
Hi Bill, .> copper bars will not work Whoa – this is a trap for the unwary! Why is this? We have the copper bridging bars, for use with the threaded studs with nut. Naturally enough, if we add battery
Hi Bill, .> copper bars will not work Whoa – this is a trap for the unwary! Why is this? We have the copper bridging bars, for use with the threaded studs with nut. Naturally enough, if we add battery
|
By
David Vogel
· #46028
·
|
|
Batteries: single failed battery in the house bank, impact for other batteries
Hi Mark, Thanks for that. Yes, it’s all in the mix at the moment. Lithium is not in the picture, mainly because of the need to change charging and management equipment & regimes. Also, as you say, the
Hi Mark, Thanks for that. Yes, it’s all in the mix at the moment. Lithium is not in the picture, mainly because of the need to change charging and management equipment & regimes. Also, as you say, the
|
By
David Vogel
· #46018
·
|
|
Batteries: single failed battery in the house bank, impact for other batteries
Hi Mark, Done. Thanks. David From: <main@AmelYachtOwners.groups.io> on behalf of Mark McGovern <mfmcgovern@...> Reply-To: <main@AmelYachtOwners.groups.io> Date: Thursday, 30 May 2019 at 10:39 am
Hi Mark, Done. Thanks. David From: <main@AmelYachtOwners.groups.io> on behalf of Mark McGovern <mfmcgovern@...> Reply-To: <main@AmelYachtOwners.groups.io> Date: Thursday, 30 May 2019 at 10:39 am
|
By
David Vogel
· #46012
·
|
|
Batteries: single failed battery in the house bank, impact for other batteries
Thanks Alan, The old start battery seems to be OOK in service. However, it appears that the battery that was paired with the failed one is also on the way out (if not already failed, just showing sign
Thanks Alan, The old start battery seems to be OOK in service. However, it appears that the battery that was paired with the failed one is also on the way out (if not already failed, just showing sign
|
By
David Vogel
· #46009
·
|
|
Batteries: single failed battery in the house bank, impact for other batteries
Thanks Bill, for the double-barrel response, Batteries: We are leaning towards replacing the whole lot with FIREFLYs, per Bill KINNEY on Harmonie. If this does not prove possible within a reasonable t
Thanks Bill, for the double-barrel response, Batteries: We are leaning towards replacing the whole lot with FIREFLYs, per Bill KINNEY on Harmonie. If this does not prove possible within a reasonable t
|
By
David Vogel
· #46007
·
|
|
Batteries: single failed battery in the house bank, impact for other batteries
Greetings all, Whilst trouble-shooting an unserviceable ONAN (failure to crank), I checked out the health of the 105Ah 800CCA AGM start battery (good), and house-bank (12x105Ah AGMs). Start and house
Greetings all, Whilst trouble-shooting an unserviceable ONAN (failure to crank), I checked out the health of the 105Ah 800CCA AGM start battery (good), and house-bank (12x105Ah AGMs). Start and house
|
By
David Vogel
· #45886
·
|
|
Electric Motor for SM main outhaul/furler
Thanks Bob, Yes, Didier, he is a real gem. He did our engine mounts in 2017, and the new wire-mesh filter (and stop-cocks) for the ONAN in 2018. Most comforting to know that the impeller is still inta
Thanks Bob, Yes, Didier, he is a real gem. He did our engine mounts in 2017, and the new wire-mesh filter (and stop-cocks) for the ONAN in 2018. Most comforting to know that the impeller is still inta
|
By
David Vogel
· #45710
·
|
|
Electric Motor for SM main outhaul/furler
Hi Eric, With pleasure ... Type: MBT82 M Induit: 24V 27A Puissance: 450W Vitesse: 3100min-1 Service: S2 5mn Protection: IP44 Classe: F Blue skies, David SM#396/Perigee
Hi Eric, With pleasure ... Type: MBT82 M Induit: 24V 27A Puissance: 450W Vitesse: 3100min-1 Service: S2 5mn Protection: IP44 Classe: F Blue skies, David SM#396/Perigee
|
By
David Vogel
· #45693
·
|
|
Electric Motor for SM main outhaul/furler
Hi Gary, Thanks for your response. The silver motor is by “Nidec”, sub-titled LEROY-SOMER (L-S is part of the NIDEC group, apparently). Yes, further research reveals that the motors I have installed o
Hi Gary, Thanks for your response. The silver motor is by “Nidec”, sub-titled LEROY-SOMER (L-S is part of the NIDEC group, apparently). Yes, further research reveals that the motors I have installed o
|
By
David Vogel
· #45687
·
|
|
Electric Motor for SM main outhaul/furler
Greetings, AMEL France just filled an order for a spare electric motor and gearbox for the SM Main Outhaul/Furler. The electric motor is a little different to what I expected. Please see the silver mo
Greetings, AMEL France just filled an order for a spare electric motor and gearbox for the SM Main Outhaul/Furler. The electric motor is a little different to what I expected. Please see the silver mo
|
By
David Vogel
· #45683
·
|
|
built in breaking system ...
B.O.A.T. = Broken, Or About To …
B.O.A.T. = Broken, Or About To …
|
By
David Vogel
· #45581
·
|
|
100 amp charger on sm2k
Greetings all, I have a top-of-mizzen Rutland 1200, installed 2018, cost to purchase-and-install ~$2,200-. The running count for the wind-gen since it was last reset 920 hours ago Arriving on-anchor,
Greetings all, I have a top-of-mizzen Rutland 1200, installed 2018, cost to purchase-and-install ~$2,200-. The running count for the wind-gen since it was last reset 920 hours ago Arriving on-anchor,
|
By
David Vogel
· #45573
·
|
|
Spare fresh water pump
Hi all, We are currently using the Jabsco VFLO 5.0 series: constant-pressure variable-speed 5.0gpm/19lpm pumps,. No accumulator. Quiet in operation. Details Series ID: 42755-0x9y Model numbers ending
Hi all, We are currently using the Jabsco VFLO 5.0 series: constant-pressure variable-speed 5.0gpm/19lpm pumps,. No accumulator. Quiet in operation. Details Series ID: 42755-0x9y Model numbers ending
|
By
David Vogel
· #45504
·
|
|
Greasing autoprop
Hi all, Whenever hauling your AMEL fitted with a BRUNTONS AutoProp, one of the first things on the To Do list should be to grease the autoprop. This is because, especially for longer haul-outs, any wa
Hi all, Whenever hauling your AMEL fitted with a BRUNTONS AutoProp, one of the first things on the To Do list should be to grease the autoprop. This is because, especially for longer haul-outs, any wa
|
By
David Vogel
· #45436
·
|
|
Plastic Bins for Heads
Greetings all, Our plastic bin in the forward head is starting to show signs of deterioration, cracking and the foot-pedal fractured. We have looked high and low for a suitable replacement, but to no
Greetings all, Our plastic bin in the forward head is starting to show signs of deterioration, cracking and the foot-pedal fractured. We have looked high and low for a suitable replacement, but to no
|
By
David Vogel
· #45435
·
|