|
2008 Amel 54 rigging
Hello Laurens. Long time… It is best to ask your insurance carrier what limitations of time are placed on your standing rigging. Most insurance companies that do state limitations usually require comp
Hello Laurens. Long time… It is best to ask your insurance carrier what limitations of time are placed on your standing rigging. Most insurance companies that do state limitations usually require comp
|
By
amelforme
· #57497
·
|
|
ACMO v Kos Hama X rigging wire
What is the average lifespan for the ACMO rigging ? Our 54 is from 2008 when we need to think about replacement ? Best Laurens
What is the average lifespan for the ACMO rigging ? Our 54 is from 2008 when we need to think about replacement ? Best Laurens
|
By
Laurens Vos
· #57496
·
|
|
Lofrans Tigris Windlass
Thanks Bill, but the breaker was on as each time I tested with the cockpit joystick first and it’s running fine! When I find the issue I will post the cause and solution. Ian
Thanks Bill, but the breaker was on as each time I tested with the cockpit joystick first and it’s running fine! When I find the issue I will post the cause and solution. Ian
|
By
Ian Park
· #57495
·
|
|
Lofrans Tigris Windlass
Ian, I know that you know the following, but since you did not say, I will offer this: I have had more than 1 experienced clients have the same issue. I always ask if they have turned on what I call t
Ian, I know that you know the following, but since you did not say, I will offer this: I have had more than 1 experienced clients have the same issue. I always ask if they have turned on what I call t
|
By
CW Bill Rouse
· #57494
·
|
|
Best Sailrite flightcase storage in A54?
Hi Thomas, one of the reasons why I have my sailrite under the portside double berth in the front cabin is, that it fits in perfectly there. If you use the 2nd compartment, seen from the left hand sid
Hi Thomas, one of the reasons why I have my sailrite under the portside double berth in the front cabin is, that it fits in perfectly there. If you use the 2nd compartment, seen from the left hand sid
|
By
Alexander Hofmann
· #57493
·
|
|
Lofrans Tigris Windlass
Craig, Thanks for your reply. It looks quite similar to my wiring. The red and two brown wires on my photo to up to the windlass switches. There is no voltage registering on the red wire which is the
Craig, Thanks for your reply. It looks quite similar to my wiring. The red and two brown wires on my photo to up to the windlass switches. There is no voltage registering on the red wire which is the
|
By
Ian Park
· #57492
·
|
|
FW: Amel Owners Survey Results
Hey Teun I'm referring you to the AMEL insurance group. If you want to hear about this plan talk to me.
Hey Teun I'm referring you to the AMEL insurance group. If you want to hear about this plan talk to me.
|
By
Marcel Tromp
· #57491
·
|
|
ACMO rigging - unusual failure
We keep our 1992 SN "Sangaris" at the dock in front of our condo in Delray Beach, FL, where she's been in her slip for two years, what with Covid and other issues preventing active cruising. Today, Ka
We keep our 1992 SN "Sangaris" at the dock in front of our condo in Delray Beach, FL, where she's been in her slip for two years, what with Covid and other issues preventing active cruising. Today, Ka
|
By
Craig Briggs
· #57490
·
|
|
Lofrans Tigris Windlass
Hi Ian, I checked my SN today and find no 5A fuse (or any other small size) in the low voltage wires to the windlass. I only have the 100A breaker in this picture. --The fuse holder to the upper left
Hi Ian, I checked my SN today and find no 5A fuse (or any other small size) in the low voltage wires to the windlass. I only have the 100A breaker in this picture. --The fuse holder to the upper left
|
By
Craig Briggs
· #57489
·
|
|
Recommendations for a Med Refit for Amel Maramu
Hello Steve, I wanted to do a complete refit of the Meltem I just bought. If you use the yards at Port Napoleon or Port Navy service I would be careful. The Yanmar and Onan mechanic did an outstanding
Hello Steve, I wanted to do a complete refit of the Meltem I just bought. If you use the yards at Port Napoleon or Port Navy service I would be careful. The Yanmar and Onan mechanic did an outstanding
|
By
JB Duler
· #57488
·
|
|
ACMO v Kos Hama X rigging wire
Paul, I am careful not to criticize a vendor or product in this Group because it is against our rules. Instead I will focus on positive comments as long as I have positive comments to offer. 1.) ACMO
Paul, I am careful not to criticize a vendor or product in this Group because it is against our rules. Instead I will focus on positive comments as long as I have positive comments to offer. 1.) ACMO
|
By
CW Bill Rouse
· #57487
·
|
|
Sea Chest
Hi Mark, Thanks for the clarification. I can see how it would help keeping units downstream of the manifold primed. A54 (at least ours, but I believe all) have a check valve in front of the anchor was
Hi Mark, Thanks for the clarification. I can see how it would help keeping units downstream of the manifold primed. A54 (at least ours, but I believe all) have a check valve in front of the anchor was
|
By
Sv Garulfo
· #57486
·
|
|
ACMO v Kos Hama X rigging wire
Bill I asked Acmo, the cost including fittings was 10631 € fd, remains installation and tuning, The cost to have the whole job done with Kos wire is 9100 € with Selden fittings and the turnbuckles for
Bill I asked Acmo, the cost including fittings was 10631 € fd, remains installation and tuning, The cost to have the whole job done with Kos wire is 9100 € with Selden fittings and the turnbuckles for
|
By
Paul Osterberg
· #57485
·
|
|
ACMO v Kos Hama X rigging wire
Paul, in the cases I was referring to the rigger used the same size wire that was originally installed. But, Amel twice changed the size of the wire on the 54 main shrouds. Neither the rigger nor the
Paul, in the cases I was referring to the rigger used the same size wire that was originally installed. But, Amel twice changed the size of the wire on the 54 main shrouds. Neither the rigger nor the
|
By
CW Bill Rouse
· #57484
·
|
|
Best Sailrite flightcase storage in A54?
Hi all, Many thanks for your input, there are quite a few interesting options. I should have asked in the original post, but do you have any particular fittings/fasteners to secure the heavy beast in
Hi all, Many thanks for your input, there are quite a few interesting options. I should have asked in the original post, but do you have any particular fittings/fasteners to secure the heavy beast in
|
By
Sv Garulfo
· #57483
·
|
|
ACMO v Kos Hama X rigging wire
Thank you Bill, But have can they miss the dimension on the wire? I assume the original size should be good enough. Paul
Thank you Bill, But have can they miss the dimension on the wire? I assume the original size should be good enough. Paul
|
By
Paul Osterberg
· #57482
·
|
|
Recommendations for a Med Refit for Amel Maramu
Hello Steve, I am quite new with Amel (I acquired my SM last November). I had to replace some sidestays following the survey from Olivier Beaute. Since the boat was in La Grande Motte, I have asked «
Hello Steve, I am quite new with Amel (I acquired my SM last November). I had to replace some sidestays following the survey from Olivier Beaute. Since the boat was in La Grande Motte, I have asked «
|
By
Alain Blanchard
· #57481
·
|
|
Recommendations for a Med Refit for Amel Maramu
Hi Steve, You may want to consider Turkey for having the majority (if not all of this work done) Q Sails in Izmir can advise and provide new sails as they have already for many Amels. They can also ar
Hi Steve, You may want to consider Turkey for having the majority (if not all of this work done) Q Sails in Izmir can advise and provide new sails as they have already for many Amels. They can also ar
|
By
Ross Hickey & Donna Hammond
· #57480
·
|
|
White plastic "tube" standing rigging protection?
Steve, In my experience, it depends on how tight the plastic is to the wire and how well you rinse the wire inside the plastic. Also sometimes dust will accumulate between the wire and the plastic and
Steve, In my experience, it depends on how tight the plastic is to the wire and how well you rinse the wire inside the plastic. Also sometimes dust will accumulate between the wire and the plastic and
|
By
CW Bill Rouse
· #57479
·
|
|
Recommendations for a Med Refit for Amel Maramu
I always recommend: Nicky’s Rigging & Marine Services Malta Mobile +356 79271668 Email. nickysail@... Nicky has re-rigged a large number of my client's Amels. If you help him by simply handing
I always recommend: Nicky’s Rigging & Marine Services Malta Mobile +356 79271668 Email. nickysail@... Nicky has re-rigged a large number of my client's Amels. If you help him by simply handing
|
By
CW Bill Rouse
· #57478
·
|