You may want to check your shaft alignment. Steve Leeds Yacht MACCABEE Sharki #121

HI Rainer, I've changed my cutlass bearing many times in the past (the previous owner was using a 1 3/8" cutlass bearing when he should have used 35mm! I did the same for several years until I changed

Thank you. That is very attractive. Unfortunately, it is the bottom part of my faucet that broke!

We have had a failure of our galley faucet on our Sharki. It looks like the new one Andy on PALADIN purchased from the German catalog would be a great replacement. The posting is from 3 years ago -- n

Hi Dee, It's a nice boat but I'm pretty sure it is already sold. Steve Leeds Sharki #121

Are you just servicing the steering rack or replacing the cables? Steve Yacht MACCABEE 1985 Sharki 121

3-D printing seems like a very good idea, but I haven't found anyone to do it locally. Steve Yacht MACCABEE Sharki #121

Hi Dieter, I have looked into having one machined in plastic, or cast in aluminum, both too expensive. One possibility is home casting in plastic as I have a sample from another boat to work with. I'l

After nursing the old plastic cover for 25 years, the plastic cover on the mechanical rudder indicator on the steering wheel hub on our 1985 Sharki has finally disintegrated. I know most owners with t

Does anyone have a source for the Genoa furling motor cable? The closest I can find is three conductor yellow shorepower cable #6 AWG. I haven't been able to find black. UV resistance and flexibility

I've installed these on a number of boats in the last few years and everyone is happy with them: 4 1/2" Sealed Beam Replacement LED Spreader Lamp Bulb 4 1/2" Sealed Beam Replacement LED Spreader Lamp

Hi Ken, Joel Potter suggested I get in touch with you as I am in the process of rebuilding my Nirvana furling gear on my 1985 Sharki, which Joel tells me is identical to the Maramu gear, and I underst

I am in the process of rebuilding the swivel in the mainmast and mizzen mast of my 1985 Sharki with Nirvana rig. The big challenge is turning out to be locating a replacement combined needle roller be

Kindly View The Document I Uploaded For You Using Google Docs. Just Click Here To View The Google Document I Uploaded For You. Thanks [Non-text portions of this message have been removed]

Thanks! Steve ________________________________ To: amelyachtowners@... Sent: Friday, May 25, 2012 10:23 AM Subject: RE: [Amel] Plastic engine blower duct vent louvered covers Hi SteveAbout

Thanks! Steve ________________________________ To: "amelyachtowners@..." <amelyachtowners@...> Sent: Friday, May 25, 2012 7:53 AM Subject: Re : [Amel] Plastic engine blower duc

The Plastic engine blower duct vent louvered covers, marked Nicoll 100 on my Sharki are in need of replacement. Several years ago I could find these on the Nicoll website but no longer. Do anyone know

Hi David, Amels, like most fiberglass boats, are made with polyester resin. However, you should always use epoxy for repairs for superior bonding, strength, and resistance to water intrusion. If you u

Hello Carsten, I have owned a Sharki since 1990 and we have lived aboard and circumnavigated on this yacht for 14 years. I also have experience with the Maramu, having just sailed one from Fort Lauder

Geoffrey, Unfortunately, I think that is the case. If there is a plate, I'm not aware of it. Fuel polishing services use a hose within a hose (one squirting and one sucking) to stir up all the crud in