Hi Amelians! We are now in Whangarei NZ. I need a new charger for the Onan Generator. Is there someone who has done this replacement with a good charger? I am looking at Victron? Thanks in advance for

Thanks a lot Bill! Arthur

Where can I find the Oilcooler for the Z25 gearbox. The Bowman DC60. Which is the exact number on the one I need XXX. There are so many variants. For SM435. Vista. Kindest regards AND FAIR WINDS Arthu

I took the picture AFTER the genset was running But during Onan worked the first green led was on and the last red. /arthur

Hi Bill! Yes. The button on panel is down of course 100AMP. Everything has worked fine since 2018 June when we bought Vista. But I will check the fuse under the hood. Thank you for showing me. Can the

Hello ! The Onan Genset is not charging the battries. All else is working, Clotheswasher, outlet, Isotherm. The red ledlamp about FUSES is on, and green on ....... Where is the fuse or fuses. Are they

It is the saloon table extension! /A

Thanks for answer Porter! I corrosion X and slightly change the cutoffs?? What does it mean practically. What needs to be done? Regards Arthur

We have the Idromini Acb Waterpump from Gianneschi. Sometimes it will not stop, the pump continues. We have to stop it manually on the pressure switch.... I have pumped up to 2 bar and cleaned the pre

Thank you all! I scubadived and mounted the new Bowthrusterpropeller, delrinhub and new nylon screws..... I usel mmM8. Stainless steelsqrews as Kevin pointers out. 30 minutes in Water and preparing sq

Thanks for sharing Kindest regards Arthur

Thank you Kevin for good instructions. Kindest regards Arthur

Good Morning Alexandre. Thank you for showing me all very informative pictures. Sincerely Arthur

Thanks Bill! I dive down replace the delrin hub and mount the new propeller with new nylon screws. See if it works out under water. Then zincanod on prop I replaced under water in some minutes that wa

I need some pictures to understand how to fit the new bowthruster propeller. Propeller and 6 nyloscrews are gone. The round nylon with Tap is there. Can I use that old one and screw the new propeller

I just can not move the filterscrew on filtertop at my ZF25 gearbox. The top plate will crack if I put möte power. I want to change the filter..... Has Anyone has this issue???? fair winds arthyr sund

How often does the filter need to be changed? How many hours?? Fair Winds to all. arthur Sundqvist SM435. VISTA

Thank you. Bill... Kindest regards Arthur Skickat från min iPhone

How and where do I Grease the Steering Cables? arthur sundqvist sm435. Vista Fair winds.....

Thank you. I Will check Skickat från min iPhone