Hi Dean, A small chisel and hammer, takes a few hours. What you see is what needs to be chiseled away, the tube into the engine room is full of foam. Once you have chiseled away the epoxy you can pull

Hi Peter, From the Quattro 8000 we supply directly to the 220v circuit board and have a completely separate cable/lead to the “Horizon 3” Oven with 3 Induction Hot Plates. Both cables/leads have separ

Hi Jeremy, We have the Onan 11KW in the engine room, it does get hot in there. The generator sends 220V to the Quattro. We can only take 8000W before the breaker kicks on. This is I am told something

Hi again Bill, Attaching a few photos but will post more and explanation how it all was put together. The 220V from the Victron now powers completely the 220V panel in the galley. The generator and sh

Hi Bill, I did notice at the time that Gn Espace sold cookware. Did not know this about cooking standards though. Thanks for the info. Maybe. if the rep had offered new oven trays and baking dishes I

Hi Bill and All, When we were looking at electric ovens with induction cooktops the only 2 basic choices were the Ocean Chef 3 from Gn Espace UK and the Horizon 3 from Marine Cookers "Techimpex.tv". T

Hi Peter, When you get your oven it should have the measurements that you will use. I used as spacers the position blocks and dividers that came out when I took out all the 12 lead acid batteries. Sol

Hi, We are still trying to put this in a special post for the forum. Taking time. We installed the Horizon 3 electric oven with 3 burner induction cooktop from Marine Cookers in Italy. The width of th

Hi Nick, We are nearly finished with the complete changeover to Lithium. I will be able to post a lot next week. We started this back in June 2020, luckily we have had to stay put here in Le Marin, Ma

Hi Thomas, Easy, I took out the Bose system main box under the saloon table forward seat. With all the latest music and sound systems it makes lots of sense to free up the weight of this ancient ultra

Having just completed my Lithium install I have this Mastervolt mass sine 24/500. Excellent condition. Available if anyone is in need. Barry and Penny "SV Lady Penelope II" Amel 54. #17 Sainte Anne an

Thank You, Thank You, Thank You. I have been sanding, cleaning this door for months after the 2nd Captain put some teak stain on to make it look pretty. Building my muscles lifting it up and pushing i

Hi Alan, I do have some turn on/off knobs. If you don’t pull the cover plate out when grilling you can melt these. I am currently offering all spares as part of the oven sale. Will let you know next w

#stove

Hi Eric, Contact: connor_barry@... UK Cell: +44 7790 399900 Martinique Cell: +696 696 50 90 49 Best. Barry

#stove

We are completing our full conversion to Lithium batteries next week on the Amel Caraibe dock at Le Marin, Martinique. Our Eno oven cooker is being replaced with the Italian made Horizon 3 Electric Ov

#stove

Hi Scott, If you pull the cover from the bottom seat section you will see that the plastic frame is all broken. I tried filling the inside of the plastic seat base with dense foam from a can after glu

Hi Mark, Just replaced all Lewmar hatch lenses due to stains on the acrylics. All the replacement lenses came with new seals. I have all the old seals in perfect condition. 2 x size 54, 3 x size 50, 1

Dear All, When I was child growing up I was told that I could find a Pot of Gold at the end of a Rainbow. Voila, I found it. An “AMEL”. Next to us in our anchorage. Very Best Barry and Penny “SV Lady

Hi, this was on our 2006 Amel 54 when we bought in 2015. We thought it was a standard attached by Amel at build. Was very helpful when we first sailed but we do more checks now. Very Best Barry and Pe

Hi Paul, I have gone 9 months and no problem. CopperCoat been on for over 3 years now. On another issue. I have changed the the lifting pistons on my windscreen in preparation for replacement. Can’t g