Mod will have exactly what you need I replaced mine last year in the meantime I took some small tubing and made a temporary set up

FYI delos did modify their anchor roller to accept the Mantus

Thanks Richard

Hi guys random question but has anyone found an ice maker they really like and is reliable?Cheers Courtney Trippin 54 #101

You need a Puller it's much safer but if push comes to shove I hammered mine out with a blank and mini sledge

thanks!

hi guys would one of you mind sharing some photos of the problem area and your solutions? Cheers Courtney Trippin 54#101

For me I find the furler is faster than the outhaul so I slack it a little first then run at the same time watching for too much tension in the sail CHeers Courtney Trippin 54#101

Hi David I have a triangular loop at the base of one of my supports for the safety rail about halfway between the small winch and the stern where I hook the pulley then run it to the winch as you have

Hi David it the problem is occuring only when slightly off the wind try pointing into the wind before furling that may help. I've had similar issues with both the main and mizzen it seems to come and

I concur great meeting thanks to all for sharing their thoughts and time Cheers Courtney

#cal-reminder

Leave the string attached to the ‘stick’ and tie it to the new switch easy Cheers Courtney Trippin 54 #101

If the pads are not pressing enough A short-term fix is to place a quarter or similar coin where the ram press is to engage the brakes this will stop your shaft from spinning while Sailing and get rid

Randall For two seasons I ran my bow thruster with just the battery’s almost never starting the generator before using. that huge draw on the batteries sent them to the morgue years sooner than they s

biggest problem with not starting the Gen is that you significantly shorten the life of your lead acid or gel batteries I'm not sure about lithiums just ask me how I know.........after killing 12 lead

David my buttons face forward in the open cabinet just forward of the nav station they are white Courtney Trippin 54 #101

David look on the wall of the cabinet behind the more aft chair there should be manual buttons there Cheers

Such a bummer Paul thanks for sharing Cheers Courtney

Just turn off before reducing the pressure this avoids the rinse Cheers Courtney Trippin 54 #101

no I don't all that you need to do is have the Stainless cut closer to the deck then finish the edges to avoid chafing cheers