SM 316 with 8 100Ah battery ... JLM Le 30/10/2020 à 06:42, eric freedman a écrit :

On CottonBay I messured in the past the bow thruster curent : https://amelyachtowners.groups.io/g/main/photo/84720/1?p=Created,,,20,2,0,0 Jean Luc CottonBay

I agree, Amel bimini is a bit has been ... I prefer the Sunbrella fabric mtch more modern colors and especially with the zippers on the bars which allows disassembly for wintering and in addition the

Hello For those who wish to put a much more powerful engine check (with AMEL) the compatibility with the bevel gear (sail drive) which can then be largely undersized .... CottonBay SM316

#solution

Hello, Amel put an too big AUTOPROP propeller on SM with TMD22 so the maximum power was approximately 40 HP .... and the RPM on best sea and boat condition was 2 000 - 2 200 RPM. To go over put a smal

#solution

Bonsoir, On CottonBay we has last 2,5 years induction plate and found it marvellous ! Gas is only as backup .... and we are thinking to suppress definitively gas .... Bon soir JL MERTZ CottonBay Garan

Hello Ian I bought for CottonBay a new turbo on www.turbolader.net I pay 540 euros + 20 euros for shipping to France Nice service JLMERTZ Le 28/09/2019 à 05:18, Ian Townsend a écrit : Garanti sans vir

Hi Ruedi, The best is to fix it, but if you fix it it MUST be without any gap (possibility that the rude can move) ... else do not fix it ... JLMERTZ CottonBay Garanti sans virus. www.avast.com

Hi, In France with our President Emmanuel Macron we are Champion in the World for Taxes and Taxes and Taxes ! Le 18/09/2019 à 11:51, Eric Meury a écrit : Garanti sans virus. www.avast.com

Bill, there are 3 red limit switches attached on the stock, see attached file Merci Jean Luc Le 08/09/2019 à 18:27, CW Bill Rouse a écrit : Garanti sans virus. www.avast.com

Hello all ! Does anyone have the electrical schematic of the bow thruster controls (Super Maramu 2000) ? Merci Jean Luc CottonBay SM316

Hi Tim On CottonBay we do that every 6/7 years and do 120-160 hrs / Year, so I agree with 1000hrs, We NEVER had water in the Cdrive, never.... Next I will put on the bronze speedyslives, so I expect t

Hi Ian, If you speech of the Speedisleeve flag, NO I reduce the seize of the shaft with sand paper to have the exactly same diameter of the inner size of the seals, and ad a lithe "epoxy (araldit)" ,

Hello Mark, I used 10 years ago SKF Speedi-Sleeve, I posted photos ... it is wonderful .... never change it ! ....I can recommand you this JL Mertz CottonBay Garanti sans virus. www.avast.com

Bill, Bernd, removed the 4 screws I so it is easy ! Best regards, CottonBay JLM Le 29/08/2019 à 14:46, CW Bill Rouse a écrit :

Hello, if the 4 bolts that hold the bow thruster are out it should be easy, Drive the bow thruster simply go down, then from the outside of the boat rotate the bow thruster, possibly by a movement rot

Hi ! I had the same problem ... You need a lot of patience, mutch WD40 and patience, do not forcing, do not break the threads, the contact is bronze on stainless ... I needed 2 days ... good luck JLM

Bill, For your information the kit is very very easy to make by your self, for only some dollars ... I buy the seals for over 10 years at 123roulements with prices and delivering time that I found ver

Bill, About what for C-drive seals you are speeking ? Jean Luc Le 21/08/2019 à 15:11, CW Bill Rouse a écrit : Garanti sans virus. www.avast.com

Paul, in France you have www.123roulement.com .... You will find all what you need with fast delivery .... Jean Luc Le 21/08/2019 à 09:53, Paul Brown a écrit : L'absence de virus dans ce courrier élec