Hi Nezih, I am an Amel owner in Turkey. I live in Izmir and Alacati and my boat is moored in Alacati Marina. The boat is an Amel Mango built in 1981, Hull Nr. 18. My e-mail is jwjohanssen@...

Hi Bill, I am not sure whether yopur bowthruster is simular like mine on a Amel Mango 1981. If you have not removed the bolt, try to start from the bottom,i.e.disamble the gearbox and then pull everyt

Dimitris, thank you very much for your answer. Best regards Jurgen ________________________________ To: amelyachtowners@... Sent: Monday, 10 October 2011, 18:09 Subject: RE: [Amel] Current

as you might have read I lost my bowthruster propeller unit into the sea. A very nice Greek fisherman retrieved it. You mentioned that one could fabricate all parts in steel. What about the fiberglass

Hi Jean-luc, as I wrote recently I lost my bow thruster propeller unit alltogether into the sea (except the motor) while ankering in a Greek bay. I have written twice to Amel asking them whether they

Hi Richard, Thanks for the advise. I had cleaned my contacts with spray but maybe it was not enough. So I will try fine sandpaper. Best regards Jurgen ARGO IV Mango18 1981

Hi Lui, thank you very much for your advise and I will certainly look into it if I can't get my Neco repaired Best regards Jurgen ARGO IV Mango #18 1981

Hi Serge, thank you for you quick replay and your advise. I had checked that there was no ferrous metal near the compass. The only thing I have close by is the electric motor/compressor for the deep f

Hi Lior, Thank you very much for your answer. Could you tell me what kind of potentiometer one needs. As I am not an electrician how do you measure to find out the ohms? Thank you again Regards Jurgen

Hi Alex, thank you very much for your answer. Next time I go to the boat I will get the exact model no and will then contact Myles Electronic. Will keep you informed. Best regards Jurgen ARGO IV Mango

Hi All, the Neco Autopilot on my Mango #18 1981 is not working properly anymore. The mechanics seem to be OK, i.e. the motor works, the clutch locks in and the pilot might even work for 15 to 30 min.

Hi All, as faily new owner of ARGO IV a Mango #18 from 1981 we experienced somthething which I would like to share with you. When servicing our bowthruster this winter I noticed that the holes in the

wrote: Marina in Turkey. We would also like to do some maintenance there. Does anyone have experiences (good or bad) with this particular marina? Hi Rink, Kusadasi marina is not one of the newest in T