Hi Nicolas, Mark is busy wrapping up another project so I am jumping back in. If you mean the SS plate with 3 screws in this photo, it is included with your oven from GN Espace. Denise McGovern S/V CA

We have installed the OceanChef 3 on our Super Maramu and could not be happier. Close enough to the 54 for you to get an idea of the fit. We had the Eno 4 burner previously. Denise McGovern s/v CARA S

I bought wrinkle tape and hooks from Curtain Tracks. The hooks are Recmar 4140 https://www.curtain-tracks.com/recmar-4140-plastic-wrinkle-band-curtain-hook.html Denise s/v CARA SM 440

The curtains on the latter model SMs was a blue and yellow stripe with a UV backing. Ours faded, likely from washing by a previous owner because they were slightly shrunk too. I used an outdoor fabric

Vic, On ours, the wheel side goes on the dock and the boat side has a short pole that goes into one of two available corresponding holes on the stern (one on deck and one on the top step). This allows

Sound good. Can you post a photo? Denise McGovern CARA, SM440, Chesapeake Bay

Miles, We used Waterlox on a 40 year old cabin sole with beautiful results. https://www.waterlox.com/marine An big advantage is that you can re-coat at any time to build the finish, fix a problem spot

I would love to see a photo. I am about to start this task on Cara. Denise McGovern s/v CARA SM #440 Deale, MD

Pat, Based on USCG Form 5397, Application for Simplified Measurement, CARA is documented 26 GRT and 23 NRT. Denise SM #440 CARA Deale, MD, USA

Luckily there is a YouTube video from Mother Ship Adrift on exactly this: https://youtu.be/NYPxUt55tjk Denise s/v CARA Chesapeake Bay

CARA is USCG Documented: 26 GRT, 23 NRT Denise McGovern s/v CARA SM #440 Chesapeake Bay

Bill, This looks like an event to go on the new calendar feature. Wish we could join you, Denise McGovern SM #440 s/v CARA (on the cold hard in Maryland)

https://svtourai.com/ has a photo. Denise

We use Pantaenius and had no problem getting coverage. Denise McGovern S/V Cara SM #440

We have used http://doityourselflettering.com/ for our Amel and our previous boat. The quality and service are fantastic. The site has a design feature that is fun to play with even if you decide to g

I can measure tomorrow for you. We have a handle and davits (not permanent) that I was working around. Can you post a photo of your stern? Maybe from the listing? Here is my lettering order with dimen

Jay, Here is a photo of our 2004 Super Maramu. Denise McGovern s/v CARA SM#440 Deale, MD, USA

Ryan, Congratulations and welcome! I have the 'blue floors' on our Amel but we refinished our first boat's sole just this spring. After sanding we used Warterlox Marine and it was fantastic. It will n

Mark and Denise are just on the other side of the Chesapeake. If we narrow the time down we can join in. Denise s/v Cara SM #440 Deale, MD

Anybody have an estimate for how much fabric is needed to make new curtains for a Super Maramu? Anyone successfully buy the curtain slides online or from Sailrite, or only available from Amel? I will