Hi Bill, I will be happy to join. Thanks, Ofer Magen SV Alba 54#160 Cyprus

Thanks Arno, I will check it. After the replacement of the water heaters, I will open the leaking one . Regards, Ofer Magen

Hi Craige, Thanks for your advice. Till now the people from the factory took the old boilers with them,and i couldn't check where in the tank the leak was. A new water heater was delivered, so this ti

Hi Mat, The water heaters were installed by professionals that were sent by the factory. It is something else... The leakage was from the tank . Ofer Magen

Hi to all, Few month after buying my boat in 2015, i had a leakage from the inside part of the water heater. I bought a new one from isotherm ,the same model -basic 40. Since then , 3 more boilers wer

Hallo, I have the same problem now with the 24v motor not working. Can you please explain where the brushes are and how to remove them? Thanks, Ofer SV Alba Amel 54 #160 Cyprus

Hi to all, First I want to thank the groups and mainly Bill R for the great dedication and support. I have a long time issue with boat speed on the H3000. It's randomly coming an going. My sensors are

Hi Joerg, Can you please send a photo of the installation of the super wind? Thanks, Ofer Magen Alba A54 160 Datcha area Turkey

Hi, Thanks for sharing. How and where did you install the extra solar panels? SY ALBA Amel 54 160 Ofer Magen

Hi to all. I need the Dimentions of the bottom of the keel Amel 54. I want to haul my boat out in a shipyard in Limassol Cyprus and need to know if the keel can come between the wheels of the trailer.

Hi, I was also looking for a circulation pump for the fridges. I bought a "europump" which is rated on the label to draw 1amp, but actually was drawing 2.5-3 amps and blew the fuse up. I changed the f

Hi to all. I have this fenomena too. I traced it to the forward sail locker. There is always a lot of humidity there. Last time I was on the boat I dried all the electrical parts and sprayed it with c

Hi Dean, In my boat the AIS is normally not transmitng. You have to read the manual and see how to change it on the plotter. On the hidra 3000, heading is off also on my boat. Ofer Magen Alba Amel 54

Hi Alan, I had the same problem. The way to solve it is to start from the main big red battery switchs. Disconnect all cables going out from the (minus),then connect them each at a time and check for

Hallo to all, We are motoring in turkey. We are hearing splashing water noise from the draining hole near the door. We checked and saw a small pipe about 15 cm in the hole. Out of that pipe there is h

Thanks Joel, Do you know where are the "junctions",in the boat,where "minus" wires from the batteries are split to groups of equipments to make the hunting more systematic? I found the voltage between

Hi to all, A year ago when I was in Gocek turkey, I asked a carbon filter to be installed. In August on the way from Cyprus to Finike, the new hose that was installed has failed and we lost all the wa

Hi, Olivier did the survey also for us in Gocek turkey. I agree with every word that was written by Mohammed. Olivier knows the Amel better than any other as he warked there for more than 20 years. Th

Thanks to all. As my boat is now in Limassol Cyprus, do you know a good b&g technician there? Regards, Ofer Magen

Hi to all, on my boat “Alba” - Amel 54, there are 2 anchors: Ultra 35 and delta 35. The Ultra is the one I normally use , maybe you should look at it too. thanks to all in the group, Ofer “Alba” - Ame