|
Prop to Zinc Connection
Bonjour Olivier, I carefully cleaned the prop shaft to get good measurements. I read zero Ohms between prop shaft and the prop. But from prop shaft to zincs on the rudder I got a range of measurements
Bonjour Olivier, I carefully cleaned the prop shaft to get good measurements. I read zero Ohms between prop shaft and the prop. But from prop shaft to zincs on the rudder I got a range of measurements
|
By
Stephan Regulinski
· #49543
·
|
|
Need to replace Isotemp Basic 40 - how to get it out?
Duane, Alternatively, conflict with the cockpit drain can be solved by shifting the tank a couple inches outboard (to port). This is simpler than modifying the tank and cheaper than buying the tank wi
Duane, Alternatively, conflict with the cockpit drain can be solved by shifting the tank a couple inches outboard (to port). This is simpler than modifying the tank and cheaper than buying the tank wi
|
By
Stephan Regulinski
· #31644
·
|
|
Furling Motor for the Genoa
Does anyone know the manufacturer and model number for the furling motor for the Genoa on the SM2000? I thought I read a thread about this motor a while back, but now I can't find it. Many thanks, Ste
Does anyone know the manufacturer and model number for the furling motor for the Genoa on the SM2000? I thought I read a thread about this motor a while back, but now I can't find it. Many thanks, Ste
|
By
Stephan Regulinski
· #31607
·
|
|
Need to replace Isotemp Basic 40 - how to get it out?
Duane, I just replaced the water heater on our Super Maramu 2000. Here are a couple of thoughts in case you have to replace yours. But keep in mind that Amel may have made some adjustments in the layo
Duane, I just replaced the water heater on our Super Maramu 2000. Here are a couple of thoughts in case you have to replace yours. But keep in mind that Amel may have made some adjustments in the layo
|
By
Stephan Regulinski
· #31606
·
|
|
replacement faucets
This is an update on my previous post, that I have since deleted. I have replaced the faucets on our SMM this past week. Here is what I've learned: Tools. The easiest way to remove the barrel nut hold
This is an update on my previous post, that I have since deleted. I have replaced the faucets on our SMM this past week. Here is what I've learned: Tools. The easiest way to remove the barrel nut hold
|
By
Stephan Regulinski
· #31486
·
|
|
Wearing out Bearing - Drawing?
Does anyone have a drawing for the wearing out bearing (WOB) for the prop shaft for the SM2000? I would like to have one machined, but do not have the off part with me. I checked the drawings/pictures
Does anyone have a drawing for the wearing out bearing (WOB) for the prop shaft for the SM2000? I would like to have one machined, but do not have the off part with me. I checked the drawings/pictures
|
By
Stephan Regulinski
· #24605
·
|
|
hard bottom sailing dinghy's
Eric, On our family trip (2000 through 2005; my wife, three children and me), we had two dinghies: an Achelis rigid-bottom inflatable and a 9.5 ft, Captain's Gig from Gig Harbour. The Captain's gig is
Eric, On our family trip (2000 through 2005; my wife, three children and me), we had two dinghies: an Achelis rigid-bottom inflatable and a 9.5 ft, Captain's Gig from Gig Harbour. The Captain's gig is
|
By
Stephan Regulinski
· #19078
·
|
|
Propshaft wearing ring
Bill - apologies for this very late response, I didn't find it until now. Capitol Area Technology is located at: 3500 Comsouth Dr., Austin TX, 78744. The package I just received had the phone number 5
Bill - apologies for this very late response, I didn't find it until now. Capitol Area Technology is located at: 3500 Comsouth Dr., Austin TX, 78744. The package I just received had the phone number 5
|
By
Stephan Regulinski
· #18747
·
|
|
Masthead Light Wiring
Steve and Liz, Thank you for the recommendation. We ordered the unit a couple of days ago and found the people at Nautus in Ft. Lauderdale helpful. You didn't say which version you ordered. Was it a t
Steve and Liz, Thank you for the recommendation. We ordered the unit a couple of days ago and found the people at Nautus in Ft. Lauderdale helpful. You didn't say which version you ordered. Was it a t
|
By
Stephan Regulinski
· #18745
·
|
|
[Amel Yacht Owners] Masthead Light Wiring
Alexandre - thank you so much for the quick reply. My SM2K is about 1/2 year earlier and has the Guest fixture, not the AquaSignal, so the wiring may be different. However, given your information, I w
Alexandre - thank you so much for the quick reply. My SM2K is about 1/2 year earlier and has the Guest fixture, not the AquaSignal, so the wiring may be different. However, given your information, I w
|
By
Stephan Regulinski
· #18705
·
|
|
Masthead Light Wiring
I am away from our boat -- S/V Hanalei, a 1999 SMM -- and do not have access to the masthead unit or the wiring diagrams. I would like to buy an LED masthead/anchor light and bring it with me back to
I am away from our boat -- S/V Hanalei, a 1999 SMM -- and do not have access to the masthead unit or the wiring diagrams. I would like to buy an LED masthead/anchor light and bring it with me back to
|
By
Stephan Regulinski
· #18689
·
|
|
Propshaft wearing ring
I was able to find the LRT 455030 in stock at Capital Area Technology, an Austin TX based company with an on-line store. They show the part for USD 10.00, which compared to buying a new wearing-out sl
I was able to find the LRT 455030 in stock at Capital Area Technology, an Austin TX based company with an on-line store. They show the part for USD 10.00, which compared to buying a new wearing-out sl
|
By
Stephan Regulinski
· #18380
·
|
|
B&G Mast Head unit for Hydra 2000 (Anemometer)
Bill - thanks for the great annotated photo! All - I called Jake at B&G USA Service (B&G Service, (954) 229 0208) and the new prices are: $135 for the bearing and $490 for the circuit board. Total mas
Bill - thanks for the great annotated photo! All - I called Jake at B&G USA Service (B&G Service, (954) 229 0208) and the new prices are: $135 for the bearing and $490 for the circuit board. Total mas
|
By
Stephan Regulinski
· #12307
·
|
|
[Amel] Out-haul gearbox for SM2K
Eric, Wow! That was fast. Thank you. A couple of questions: When you say "they ordered the parts", are you referring to Amel or Leroy Somer? Also, the reference to "roller bearings" is confusing as I
Eric, Wow! That was fast. Thank you. A couple of questions: When you say "they ordered the parts", are you referring to Amel or Leroy Somer? Also, the reference to "roller bearings" is confusing as I
|
By
Stephan Regulinski
· #11918
·
|
|
Out-haul gearbox for SM2K
To all SM and SMM owners: To revisit the subject of the out-haul gearbox and update details, I called Leroy Somer in the USA and spoke with Mathieu Herieau who told me: 1. Justin is no longer in this
To all SM and SMM owners: To revisit the subject of the out-haul gearbox and update details, I called Leroy Somer in the USA and spoke with Mathieu Herieau who told me: 1. Justin is no longer in this
|
By
Stephan Regulinski
· #11913
·
|
|
Mainsail furler gearbox - Amel 54
The original message is 8927. Stephan
The original message is 8927. Stephan
|
By
Stephan Regulinski
· #11906
·
|
|
SM2000 Holding Tank Failure SM414 Built July 2003
Ian, I had this problem on Delos, SM2000 #303, albeit less dramatically. It was discussed in a set of messages around #861 (yeah, a little while ago). I solved it with some epoxy at the recommendation
Ian, I had this problem on Delos, SM2000 #303, albeit less dramatically. It was discussed in a set of messages around #861 (yeah, a little while ago). I solved it with some epoxy at the recommendation
|
By
Stephan Regulinski
· #11855
·
|
|
[Amel] AIS
Oh for goodness sakes! A cricket pitch is a sort of side-arm throw in baseball which makes the pitcher look like a cricket, hence the name, "cricket pitch". Why this has anything to do with a "cable",
Oh for goodness sakes! A cricket pitch is a sort of side-arm throw in baseball which makes the pitcher look like a cricket, hence the name, "cricket pitch". Why this has anything to do with a "cable",
|
By
Stephan Regulinski
· #10171
·
|
|
Line Striping Tool Update
Spent about a half hour on-line at JC Whitney looking for the paint striping tool mentioned in various posts on the subject dated around 2006. I finally got an on-line sales associate to confirm what
Spent about a half hour on-line at JC Whitney looking for the paint striping tool mentioned in various posts on the subject dated around 2006. I finally got an on-line sales associate to confirm what
|
By
Stephan Regulinski
· #9600
·
|
|
Amel Stainless Steel Anchor Shank Bend
While it is true that manufacturing by carving a piece out of solid metal potentially has advantages over other processes (better control of the molecular properties is one); it is difficult to believ
While it is true that manufacturing by carving a piece out of solid metal potentially has advantages over other processes (better control of the molecular properties is one); it is difficult to believ
|
By
Stephan Regulinski
· #3781
·
|