For what it's worth, I replaced a jabsco motor which was waterlogged and replaced the seal on the other toilet. Both have been faultless for 5 years now. One thing I do is always pump out all the wate

Hi Eric, Moisture ! Dennis IL Flauto Magico SM 408

One tip, after you use the toilet, drain so there is no water in the bottom of the bowl. This stops water getting to the motor when the seals start to wear. I have not replaced any of my motors for si

Hi Bill, What exactly does a foam luff do and what are the advantages of specifying over a standard one Happy Sails Dennis il flauto magico sm 408

Subject: Amel 55 convertible Hi Does anyone have any information or photos of the new design of the 55 cockpit ? Thanks Dennis Il FLAUTO MAGICO sm 408

Hi mark, could you send me copy of your app. Thanks. Dennis

Many thanks for that. Do you have a photo of the installation. Happy Sails. Dennis Woods. IL FLAUTO MAGICO sm 408

Hi Chris, do you know if you can get the amel logo for the main sail ? Thanks, Dennis IL FLAUTO MAGICO sm 408

Had the same problem, paddle wheel stuck. Brought the unit down, striped and cleaned, put back up. Two years ago, no problems since. Can't remember what I did but it was quick and easy and involved mi

Hi Eric, I also suffer from this problem. Would it be possible for you to put up a photograph of the layout highlighting the solenoid which you think might need to be changed. Thanks. Happy sails Denn

Greg, try eBay if you can. It's full of this stuff. ! Dennis IL FLAUTO MAGICO sm408 [Non-text portions of this message have been removed]

Trevor, thanks for that, am away from my boat right now. Is there a simple method of checking the cooler to prevent this ? Dennis Woods ICC IL Flauto Magico sm 408 [Non-text portions of this message h

Dave, is there any optimum cloth weight I should go for in a load path Dacron material ? Thanks. Dennis [Non-text portions of this message have been removed]

I need to replace the mainsail on my 2003 sm2k. I would welcome advice on the best material, the weight ( in ounces) and the cut. All views would be most welcome. Happy Sails. Dennis SM408

Hi Fred, I am currently looking to change my mainsail on my Supermaramu 2000 No 408, so should fit. My boat is in Spain so the obvious questions are what price are you looking for it and what would be