Hi Slavko, Normally you can get them in (almost) every marine shop. I bought mine over there. But you can also make a research on Amazon with the keywords “marine button rubber”. You will find some 😉

Hi Paul, Here is how I did it: For the shaft packing I used 70cm of PTFE Flax shaft packing 5/16” which have to cut into three pieces. Cut the corners at an angle for a better sealing. I never remembe

Thx Bill.

Hello AMELians, When ordering parts for the Onan generator some questions were coming up: - Which ground I required? The negative ground or isolated ground (PN# 300-5040 or 300-5041)? - The 12V and 24

Yes, that’s right: It is the screw for the spare fixed prop on SM’s. it is not for the autoprop. The flat part has to be between the prop and the nut and has to be bend at the end of installation that

Hello AMELians, does anyone have experiences with removing the rudder on a SM2K and could provide the steps (a how to) and what I have to consider while de-installing the rudder? It seems that the pre

Hello all, We used the copper ground trap from the company Druseidt in Remscheid, Germany. It costs around EUR 45 and it is protected by a PVC overmoulding and the copper strap ends strengthened with

Hello AMELians, could someone provide the color numbers for a SM2K Redline for the white hull, the red water line and the red stripes at the top of the hull at the side. Thanks so much :-) Fair winds

Hi AMELians, Does anyone know where to buy the companionway locker for a SM2K or a similar one? The original one from AMEL France should cost EUR 575.00 pls taxes and fees :-o Hope to get a similiar o