Hi Peter! Thanks for the informations. I"ll try this way as well. Cheers, Jose Prieto

#solution

Hi Phil! Thank you very much! JP

#solution

Hello everyone, Please someone who is on board an SM, could you tell me the measurements of the amel logo on the sides of the boat? (bow and arrow height and width) Cheers Jose Prieto

#solution

Hello Ian, Thanks for the suggestion. I found here in the forun, the logo in pdf, but Im away from the boat (in Brazil), and I want to printed before goback to the boat. Cheers JP

#replacement

Good morning guys, I found on the group the logo design (the one that are in both boat sides). Could somebody informou the exactly log size? The guy in the printer store asked me for, Cheers Jose Prie

#replacement

Hi Bill! Thanks for the help again. cheers

#replacement

Hi everyone, Does anyone know the dessalator WM high pressure pump capacitor specification (D 60). Mine blowed up :( thanks in Advance JP

#replacement

Hi Nick, I did the test on the alternator. There is 24 volts always (engine on or off) on the positive/negative cables. Im not sure if this is the test you suggest me to do. cheers

#solution

Hello Bill, As always, thanks for your help! Cheers, jose

#solution

Hi Barry, Thanks to share your experience with me. The problem is that I’m anchored in an Island far from any town till beginning of the week, trying to solve this problem. cheers

#solution

Hi Nick! Thanks for the advice, I’ll try what you suggested me to do. cheers

#solution

Dear Amelians, Suddenly I notice that the 24 volts alternator its not charging the batteries. Any suggestion for troubleshooting? Cheers

#solution

Bill, Not wanting to be polimized but I mentioned in my first post on this subject, that in the conversation with the factory Desalator technician (I have his post on WhatsApp) he commented that the r

#replacement

Hi Bill! Dessalator should do a sort of recall, due a recognized bad material. Maybe a special price for the new end caps. The actual price for the four caps (in my case), will cost me almost 500 euro

#replacement

Hi everyone! I found on the forum, many advices regarding the membrane replacement that was very helpful. Im posting a picture from one of the end caps that is crumbling. I spoke with a technician fro

#replacement

I sent Eric a message, but I believe he is no longer in the group perhaps. One of my doubts about the system he built refers to the 12 volt element he installed, in my case the boiler is from the quic

Hi Slavco, Thanks for the address. best regards

#solution #replacement

Hi Jean-Pierre, It’s nice to know, but we left Mallorca las week, next port Genoa - Italy. cheers Jose

#solution #replacement

Hi Bill, thanks for the reply. I understand that the TDS is just a number. I've read a lot about water quality, adequate indices, how to get the values ​​and so on. I noticed that the quality of the w

#solution #replacement

Hi Jean-Pierre, Thanks for the feedback! By coincidence I recently replaced the primary filter with a new one. I confess I didn't like the look of the filter, but the specifications were correct. I wi

#solution #replacement