thanks Bill, Greatly app David Galini, A54#100

Hi Mark, Got it on ION. I have them too, so who have you insured with? Is there a list of Amel owners current companies and satisfaction ratings? You mentioned a video conference on the topic? Thanks,

I recently installed the Garmin Panoptix forward looking sonar on my A54. I chose the LiveVu Forward and FrontVu options. They sense about 300' in front with a 20deg window. the transducer is a small

Hi Paul, I had issues with my bow thruster this summer working intermittently. Although the contacts were not the problem, I tore apart the solenoid and cleaned all the parts in the quest to isolate t

Dear Doug, I too would like to replace the lift mechanism for my A54 TV. I checked the circuit and am getting power to the lift motor, but it will not activate in either direction. It was stated that

Hi rudolph, Yes. My previous owners told me and showed a photo (attached) of using the lift padeyes near fore and aft side stays for extraction of the boat by crane when no sling travel lift is availa

Hi Peter, My a54 is 69.5 feet without antennae, wind instrumtents. My bridge clearance here at Kemah Texas is 73’ at mllw and I make it through David Dickman Galini, a54#100

hi Matt, I have looked into the powering with 24v option, several possibilities but no one best solution. Has anyone actually done this and can provide details on what to buy and how to install? Did y

Hi Louis, will have a look at brushes next. Thanks

Hi rogue, Galini, A54 100. Circuit diagrams from bill rouses amel book and supplements

Hi All, I am having an issue with the bow thruster on my A54. I believe it is either the Sleipner SP 200 or SP240, the identification tag is hidden on the back of the motor next to the bulkhead and li

Hi Matt, I am getting ready to get a Starlink also for Galini (A54 #100). The RV version I assume because the marine version is very expensive. I have heard from others that one might want to drill a

Hi Amel owners: I just wanted to pass a quick Kudos note to QSails and an FYI to the groups regarding new sail purchases. I just purchased a new main made of Fibercon Pro Hybrid (dyneema supposed to b

Hi Eric and Bill, I do indeed have a standoff as Eric described and Bill showed in the picture. I could not lower it all the way by opening the standoff bracket, so had to undo the hinge at the bottom

Hi Sarah, I just did this two weeks ago here in Houston. The travel lift was too short and I had to remove both the back stays, the SSB antennae, and the mizzen topping lift myself as the marina crew

Hi all who responded regarding the main sail replacement, I appreciate it. After fair consideration, and since I have some trouble in the past with the main bunching at the head during furling, includ

hi Courtney, thank you. Information that I wanted and we are really sisterships! Where are you located currently? I am leaning toward no battens also. Best, David Galini, A54 #100

Thank you Nick. Your input is along the lines of my thinking, but the peformance loss I expect would be mostly in lighter winds. I too am talking with QSails about replacement

Hi Amel owners, I am in the process of replacing my main sail on Galini, A54 #100. The inherited main sail on the boat is likely original 2008 tri-radial hydra net. It was designed for partial vertica

hi Eric, Hope all is well. I have purchased a couple of these continuous soft shackles from local West Marine rigger (her name at the Kemah location store is Tania) for about $25 for 3mm dynema with s