Yup.

HI Bill, It is clearly marked on the back of my Autopilot case type 1 . The leads on the motor have a label stating 24 volts. This is factory stock when I bought Kimberlite. Fair Winds Eric

My autopilot is factory stock and is a type 1. Hello Eric, Good to know that Kimberlite is now approaching the 100 thousand miles! I don't know the exact specifications for these motors, but for sure,

I have just rebuild my rotary autopilot it is a 24 volt type 1 . The linear drive is a 24 volt type 2. I just want to post the info as the specs for the type one drive is for a much lighter boat , but

HI Bryce, What parts are included in your bowthruster service kit? I have a spare motor after being hit by lightning years ago. I had it rewound and rebuilt. At the time it was available from Amel as

Alex, Are you speaking of the SSB dynaplates, or the zincs on the rudder? Fair Winds Eric Kimberlite Amel Super Maramu #376

Does anyone know of a source of the continuous soft shackle shown in Bills image below? Location USA. Fair Winds Eric Kimberlite Amel Super Maramu #376 Main Mast External Halyard Block:

HI, Does anyone know of a distributor of the sheaves for the topping lift on the mizzen. USA preferably. Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi, Does this system also shut down the genset? Fair Winds Eric Kimberlite Amel Super Maramu #376

Sorry, I replied to the wrong topic. Fair Winds Eric

Hi, Does this system also shut down the genset? Fair Winds Eric Kimberlite Amel Super Maramu #376

Hi Stu, I cannot download your photos. Fair Winds Eric Kimberlite Amel Super Maramu #376

#replacement

Would you please send me your email address? Kindest Regards, Eric Kimberlite Amel Super Maramu #376 From: main@AmelYachtOwners.groups.io On Behalf Of karkauai via groups.io Sent: Sunday, July 31, 202

Hi Kent, I replaced the rivnut with a SS plate with a M8 nut welded to the back. I added 4 screws into the plate screwed into the refrigerator and put 5200 on the back. The M8 bolt sits into the hole

Tha standard Vetus coupling will not work. Amel Machines it for our engines. You must purchase it from Amel. Fair Winds Eric Kimberlite Amel Super Maramu #376

Sorry , I thought you were referring to the main gearbox. Fair Winds Eric Kimberlite Amel Super Maramu #376

Kimberlite also has different mounts. They are Yanmar mounts on the engine and Vetus mounts on the sail drive. Fair Winds Eric Kimberlite Amel Super Maramu #376

#file-notice

I think the entire gearbox from Amel is about 800 euros. Fair Winds Eric Kimberlite Amel Super Maramu #376

Hello Raul, That was an amazing job. I just have 2 comments. On later Amel’s such as mine #376 you do not have to cut the bolts to remove them from the coupling. Of course, you must use threaded rod t

The new US coast Guard regulations require fir extinguishers be less than 12 years old. I was wondering if anyone in the USA has replaced the one in the port locker with the sprinkler head above the g