Maybe somebody can help us. We've connected the NMEA 183 "out" from the Garmin GPS to the Autopilot ST 7000 "in". This works fine. Now, we also would like to connect the NMEA 183 "out" from B&G Hydra2 to the Autopilot "in". It seams not to be as easy. Has someone done this already? We'd appreciate if you could give us the correct advice to do that. It is easy on the autopilot side. The big question is the B&G Hydra2 side.
Thanks for helping us and best regards
Hanspeter & Nathalie Wehrli SM 158, SY "NatHape", Panama
I connected the ST7000 to the B&G in order to display true wind info on the B&G using heading info from the Raytheon fluxgate compass. This may not be want you want but see message 155 which contained advice from B&G Technical Dept and was very helpful. John.
--- In amelyachtowners@yahoogroups.com, "hns154es" <hns154es@y...> wrote:
Hello to all
Maybe somebody can help us. We've connected the NMEA 183 "out"
from the
Garmin GPS to the Autopilot ST 7000 "in". This works fine. Now, we
also
would like to connect the NMEA 183 "out" from B&G Hydra2 to the Autopilot "in". It seams not to be as easy. Has someone done this already? We'd appreciate if you could give us the correct advice
to do
that. It is easy on the autopilot side. The big question is the
B&G
Hydra2 side.
Thanks for helping us and best regards
Hanspeter & Nathalie Wehrli SM 158, SY "NatHape", Panama
