MaxiProp order form question


Roger Banks <roger.banks@...>
 

I'm wondering if anyone can help me with a factoid please, having
tried Olivier without response unfortunately. I own Mango 28, built
in 1982. It has the Perkins 4.236 motor with Hurth HBW400-2R gearbox.
For the purpose of ordering a MaxiProp, can you please let me know
what would be the reduction at the propellor?

Regards, Roger, Mango 28, Zorba


tepestdoc <tepestdoc@...>
 

I havce the same set-up on Tempest, Mango hull 44. I'm having surgery
tomorrow, but I'll look it up this week when I visit Tempest in the
boatyard.
Bob
Tempest
--- In amelyachtowners@yahoogroups.com, Roger Banks <roger.banks@...>
wrote:

I'm wondering if anyone can help me with a factoid please, having
tried Olivier without response unfortunately. I own Mango 28,
built
in 1982. It has the Perkins 4.236 motor with Hurth HBW400-2R
gearbox.
For the purpose of ordering a MaxiProp, can you please let me know
what would be the reduction at the propellor?

Regards, Roger, Mango 28, Zorba






[Non-text portions of this message have been removed]


tepestdoc <tepestdoc@...>
 

--- In amelyachtowners@yahoogroups.com, Roger Banks <roger.banks@...>
wrote:

I'm wondering if anyone can help me with a factoid please, having
tried Olivier without response unfortunately. I own Mango 28,
built
in 1982. It has the Perkins 4.236 motor with Hurth HBW400-2R
gearbox.
For the purpose of ordering a MaxiProp, can you please let me know
what would be the reduction at the propellor?

Regards, Roger, Mango 28, Zorba

Roger,
I posted the mechanical drawing of the prop shaft in the pistures
section. It appears to be the original drawing from Juin 1977. I have
a few notes from our installation in 1992. The shaft is 35 mm, Zinks
are 70mm, Prop is 22". For pitch adjustment: Blade Setting angle 20
degrees-15.0. Right rotation 20 degrees, X (-) is K, Y (.) is E
Let me know if this is sufficient.
Bob
Tempest
Mango 44
wrpace@cox.net




[Non-text portions of this message have been removed]