[Amel] Shipping from Amel, SM #347


eric freedman
 

Are you talking about the 2 round zincs on the rudder?
if so they are standard r5 zincs availabla at any chandlery,
just drill out the center hole a bit larger and with a bench grinder flatten the top of the zunc so a washer will fit on it,
\Eric
kimberlite

----- Original Message -----
From: "JOHN W."
Date: Wednesday, April 27, 2011 8:35 am
Subject: [Amel] Shipping from Amel, SM #347
To: amelyachtowners@yahoogroups.com

I asked Amel to ship zincs for my boat to Tortola, BVI. Is there
an inexpensive way to accomplish this as they quote 230 Euros in
transport charges?
John Sulajon


jsrogers47 <jsrogers@...>
 

On the subject of Rudder Zincs, does anyone know the dimensions of the bolts used to fasten them to the rudder?

Thanks

--- In amelyachtowners@yahoogroups.com, kimberlite@... wrote:

Are you talking about the 2 round zincs on the rudder?
if so they are standard r5 zincs availabla at any chandlery,
just drill out the center hole a bit larger and with a bench grinder flatten the top of the zunc so a washer will fit on it,
&#92;Eric
kimberlite

----- Original Message -----
From: "JOHN W."
Date: Wednesday, April 27, 2011 8:35 am
Subject: [Amel] Shipping from Amel, SM #347
To: amelyachtowners@yahoogroups.com

I asked Amel to ship zincs for my boat to Tortola, BVI. Is there
an inexpensive way to accomplish this as they quote 230 Euros in
transport charges?
John Sulajon




amelforme
 

Joel F. Potter
Cruising Yacht Specialist.
Amel's Sole Associate For America.
Sent from my iPhone.
Office: 954 462 5869
Cell: 954 812 2485

On May 14, 2011, at 5:22 PM, "jsrogers47" <jsrogers@charter.net> wrote:

On the subject of Rudder Zincs, does anyone know the dimensions of the bolts used to fasten them to the rudder?

Thanks

--- In amelyachtowners@yahoogroups.com, kimberlite@... wrote:

Are you talking about the 2 round zincs on the rudder?
if so they are standard r5 zincs availabla at any chandlery,
just drill out the center hole a bit larger and with a bench grinder flatten the top of the zunc so a washer will fit on it,
&#92;Eric
kimberlite

----- Original Message -----
From: "JOHN W."
Date: Wednesday, April 27, 2011 8:35 am
Subject: [Amel] Shipping from Amel, SM #347
To: amelyachtowners@yahoogroups.com

I asked Amel to ship zincs for my boat to Tortola, BVI. Is there
an inexpensive way to accomplish this as they quote 230 Euros in
transport charges?
John Sulajon


[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]