Adding grease to Genoa furling gearboxes on SM
Did you post the photos of where you placed the nylon screws in the Genoa
Amel Super Maramu #376 Kimberlite
<mailto:amelyachtowners%40yahoogroups.com> ] On Behalf Of Jose
Sent: Tuesday, July 26, 2011 3:33 PM
Subject: [Amel] Adding grease to Genoa and Main furling gearboxes on SM
Thanks a lot for posting your method for adding grease to the gear boxes. I
started to hear ominous sounds during Genoa furling and rapidly added two
careful drilled and threaded two access ports to the gearbox. I used the
same thread as that of the access ports of the auto prop as I was going to
use the bronze screws that remained from a recent overhaul of the propeller.
However, I thought it would be best to use nylon hardware to avoid any
possible electrolysis. Using the same grease gun I had for the prop, I
injected new grease into one port and allowed it to flow out on the other
while periodically running the gearbox until the color of the exiting grease
was close to that of the one I was injecting.
Magically the ominous sound calmed down to an quiet purr and I believe the
life of this gearbox may have been saved.
I plan to post a couple of pix of the process as I get back to the boat.
Ipanema SM 2K
Constitution Marina, Boston
--- In email@example.com
<mailto:amelyachtowners%40yahoogroups.com> , Danny and Yvonne SIMMS
outhaul gearbox as a precaution before the Pacific crossing.I removed the
boom inverted it and hit hard with my best hammer to no avail.In my former
life the standard procedure in this situation is the gas torch. I approached
the yard to see if they could help and instead of a gas torch I got a big
man with a big wheel puller and large hammer. result, shattered end plate on
the gear box. I then got what I had asked for, a gas torch and an experience
operator. Less than a minute, a gentle tap and out it came. Yes some very
localised paint discoloration, very easy to fix. The story of how we got a
new end for the gearbox manufactured in Colon over a weekend is another
story, suffice to say there are fine tradesmen there if you can find them..
[Non-text portions of this message have been removed]
Eric,toggle quoted messageShow quoted text
Sorry about the delay, life has been hectic lately.
Photos posted Under Ipanama.
They also include a pix of the outhaul shaft extractor and a couple of other things.
--- In firstname.lastname@example.org, kimberlite <kimberlite@...> wrote: