[Amel Yacht Owners] Rub Rail on the SM
toggle quoted messageShow quoted text
2 photos were attached. I needed to scroll down to see them.
From: amelyachtowners@... [mailto:amelyachtowners@...]
Sent: Thursday, May 11, 2017 12:16 AM
Subject: RE: [Amel Yacht Owners] Rub Rail on the SM
Could you provide some photos of the installed rub rails at your SM?
Thanks so much
Mia-Amara SN#135 Martinique
[Attachment(s) from Mike Ondra included below]
We had great success with installing the Taco Marine V11-0809 Flexible Rub Rail. Comes in 50’ length for $185. Fits in the groove in the fiberglass rubrail. Pictures attached (if this works).
Aletes SM#240 Rock Hall, MD
I'm thinking about putting a metal or rubber extrusion on the center part of the rub rail to keep the red part off of dock pilings.
Has anyone looked at this and what product did you use?
It seems like even with a perfect docking maneuver the marina crew insists on dragging us tight to the piling before we can position a fender. I have fenderboards that take two or three fenders but they are tough to pre-position. I'm thinking of rigging the fenderboards so there is a board keyed on top of the liferail so you only have to move the one thing (instead of two lines for the fenderboard and three fenders).