[Amel Yacht Owners] bow thruster seal replacement


rossirossix4
 

AND...outside...run a rope through the bow thruster prop triangle and cleat to deck!
Bob KAIMI


Danny and Yvonne SIMMS
 

Hi. If you mean the seal at the top of the bow thruster case where the tube enters the boat. Easy, with care so long as your thruster isn't rusted to the motor .Doesn't take long.  Put a large jubilee clamp around the tube tightly before you separate it from the motor. You need a second clamp to swap with as you go through the process.

Regards

Danny

SM 299 Ocean Pearl

On 25 June 2018 at 16:35 "sailunavida@... [amelyachtowners]" <amelyachtowners@...> wrote:

 

 

How hard is it to replace the up position seal to stop leaking while underway on SM 2000? In the water?