[Amel Yacht Owners] Re: Bonfiglioli Main Furler Schematic
toggle quoted messageShow quoted text
Our furler is now operational. Ultimately, the primary root cause was a seized bearing, the one closest to the motor. Other components definitely needed attention as well but were not critical. We cleaned it all, greased it up (vs. gear oil because we didn't trust the seals) and reinstalled the unit. However, I will take the good advice of the forum and stock two spare gear boxes. Thanks all for your input.
Note to older SM owners. We started diagnosing the issue by electrical troubleshooting. Unlike SM2Ks, there are no relays. Just the solenoids in the drop down panel above the dryer rack in the fwd head.
Lastly, I was very impressed with how easy it was to drop the furler and go manual. We did this for a couple of passages. Sweet design. No struggles.
Ian & Margaret
S/V Loca Lola II
Fort Lauderdale, Florida, USA
On Dec 1, 2018, at 4:34 AM, Ian parkianj@... [amelyachtowners] <amelyachtowners@...> wrote: